Jump to content

LemmingOfTheBDA

PC Member
  • Posts

    37
  • Joined

  • Last visited

Posts posted by LemmingOfTheBDA

  1. The solstice skin on the ignis wraith used to default the sound back to the regular ignis sound, they seemed to have "fixed" that at some point. SAD, I cant stand the wraith's sound, its like nails on chalkboard to me.

  2. Expected behavior: Hydraulic Crosshairs mod should give bonus crit chance on headshot while aiming and thus increased damage output

     

    Actual behavoir:  Damage output remains the same even when the buff is active

     

    How to reproduce: Easy (99% reproducible)

    Tested using Limbo in simulacrum with a fully modded Dex Furis as well as a Dex Furis without any mods except for Hydraulic Crosshairs (as well as a Lex)

    Also reproduced with Loki in PoE against Level 30 Lancers

    1 - In Simulacrum spawn the following (I dont have all scanned yet):

    • Kosma Officers

    2 - Equip Limbo 

    3 - Equip a secondary without Hidraulic Crosshairs

    3 - Activate 2 and 4 habilities  to keep the enemies in place (this is not required but this is how i did it)

    4 - Hit a Headshot on the enemy and keep firing while aiming, notice the damage numbers

    5 - Add Hydraulic Crosshairs mod on the weapon and try again

    6 - Hit a headshot on the enemy and keep firing while aiming (confirm the buff icon is active), notice the damage is the same as before (no increased damage due to crit chance buff)

     

    Attached screenshots from both tests

     

    Limbo with modded Dex Furis without Hydraulic Crosshairs on Simulacrum against 170 level Kosma Officers

    ub4fU4X.jpg

     

    Limbo with modded Dex Furis with Hydraulic Crosshairs on Simulacrum against 170 level Kosma Officers

    8xsezvZ.jpg

     

    Loki with unmodded Lex except for Hydraulic Crosshairs on Cetus against level 30 Elite Lancers

    Vuodp2F.png

     

    Loki with unmodded Lex wihtout Hydraulic Crosshairs on Cetus against level 30 Elite Lancers

    77yDZ3F.png

  3. Expected behavior: Nullifiers should take damage from exalted weapons after their shield bubble is burst

     

    Actual behavoir:  When using exalted weapons the nullifiers shield bubble can be destroyed but the enemy does not take any damage after

     

    How to reproduce: Easy (99% reproducible)

    Noticed while using Khora in arbitration runs. Reproduced in Simulacrum with Khora, Titania and Excalibur

    1 - In Simulacrum spawn the following (I dont have all scanned yet):

    • Corrupted Nullifier
    • Corrupted Nullifier Eximus
    • Vapos Nullifier
    • Nullifier Crewman 
    • Nullifier Crewman Eximus

    2 - Equip Titania / Khora / Excalibur 

    3 - Using an exalted weapon burst the bubbles (works)

    4 - After the bubble is burst keep shooting (enemy takes no damage)

    5 - Go near the enemy (inside where bubble was and shoot (still no damage)

    6 - If using and exalted melee try a finisher (still no damage)

     

    You will see some damage numbers ocassionally witch seem to belong to the nullifier shield drone spawning before it is actually visible.

     

     

  4. +1 

    This weapon was too OP, i can admit that. The way i used it was plowing my way though enemies using the block combos (which had slams that did not consume the stack it seems, I didnt now they were giving the damage bonus, but yeah it seemed that those slams packed a punch as well, i was almost deleting drones in arbitration by just slaming a few meters in front of them with the block combos

    I never noticed the regular slam attacks consuming the stack without giving bonus (though i had experienced issues in infested missions with a Wisp, where the stack would suddenly dissapear randomly) Also, I just got out from a sortie and i couldnt see the capacitor charges, (i couldnt tell if there was any damage buff) I only saw the charges showing up in the Simulacrum.

    Regarding the (fix/nerf) I think it would be better to give us more control over how to consume the stack, one solution would be to only consume the stack on heavy slams, and if possible only on the heavy jump slam to make sure we can stack combo and the capacitor quickly (with the spinning block combos for example) and have only one way to discharge the stack when we are sure we want to deal serious damage.

    • Like 1
  5. I'll try extensive stress testing with other apps this weekend, what stopped me from RMAing the card, is the fact that other Warframe players have detailed the exact same behaviour and my computer is brand new, in this related post many are wondering if this is not a Ryzen/Nvidia issue, but again the Warframe/Raljack combo is mentioned in the comments and the OP even mentions having changed the card without avail, so maybe we are indeed something nvidia/amd need to look into

      https://www.reddit.com/r/techsupport/comments/dnm7pt/event_id_14_nvlddmkm_cmputer_stutters_2080_ti/

  6. I have recently bought a new computer and was beginning to worry it was an issue with one of my new components until a friend sent a link to a comment in Rahetalius Discord server that this same exact issue is happening to other players.

    My system
    CPU Ryzen 3800x (No OC)
    GPU Gigabyte RTX 2070 Super Gaming OC 3x (Stock OC)
    Motherboard x570 Aorus pro wifi
    RAM Corsair 16gb 3600 mhz (using XMP1 Profile)

    I experienced 3 crashes last week as below

    1st - While doing Proifttaker
    2nd - After Profittaker while changing loadout
    3rd - After idling in Simulacrum for about an hour (had to leave my pc and when I came back WF had crashed)

    At first the computer will start freezing for while every few seconds, then Warframe crashes, but the computer will keep freezing to the point of being unusable and i have to restart (mostly hard reset as doing much else is time consuming)

    No high temps are detected at that point, but I noticed that the event viewer is logged the below error messages. Also i run Wallpaper engine in the background and after the crash I could notice artifacts all over my desktop as well

    m29ea1H.png

    ERROR

    Cita

    "The description for Event ID 14 from source nvlddmkm cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer."

    Followed by WARNING (a few until the computer is restarted)

    Cita

    "Display driver nvlddmkm stopped responding and has successfully recovered."

    I suspected i got a faulty GPU (since i had updated windows, all drivers and mobo bios) and was about to RMA the thing (even thouh no stress test, benchmark or other game was able to replicate the issue) when a friend of mine pointed me to a post on Rahetalius discord server with the below text

    "Railjack PSA: do not start a mission or return to dry dock if you are not host, as of currently it can not only in rare case crash your game, but cause a graphics card issue that renders your computer unusable."

    Discord Post: https://discordapp.com/channels/535047651281076225/535059484939255809/666683842798551060

    4Rzgo7e.png

    This is describing my issue perfectly even though i never related it to Railjack it may well be that i had been playing railjack during the sessions where the crashes happened but cant confirm

    I created a support ticket but got this highly unsatisfactory response

    Cita

     

    We found some errors in your log which is the cause of your problem, and, unfortunately, those errors do not pinpoint to one problem.

    There are many possible causes:

    1 - The graphic drivers are corrupt, re-install them from your PC/Laptop makers website and use Display Driver Uninstaller to clean the residue before reinstalling it.

    2 - If you have a PC and you know what you're doing, open up the case cover and check the power connections to your video device - re-seat if necessary. Also clean out (with compressed air) your power supply.

    3 - If your PC is quite old, your power supply may be on its way to the great power supply bone yard - have it checked out;

    4 - Downclock overclocked graphic card

    5 - Overheating issue

    6 - The graphic card is dying slowly, replace it

    Alternatively, if you are willing to sacrifice some visual quality and special effects without having your PC checked out, you can also try to tune Graphics quality Preset under Display tab to Medium or LOW at in-game Options.

    Hope this helps. Thank you for supporting Warframe!

     

    1 - This is a fresh windows install with the latest Nvidia drivers

    2- Brand new computer, every component is working correctly and is clean (apart from this WF issue)

    3 - PC IS NEW (This is clearly a copy-paste response)

    4 - Now non-stock OC done to the card, all default values (also specified)

    5 - No high temps recorded

    6 - New card... so no, it is not dying

    And also, I will not sacrifice visual quality on my new rig when I didn't have to on my 5 year old one for the game to work properly.

    Will try to keep testing out stuff to see if it gets resolved, though in a week i had only three crashes and have better stuff to do than constantly wait for WF to crash, but honestly this is turning me off WF big time, I dont want to grind for over an hour in a mission to have it suddenly crash and lose everything, also, i don't like having to hard reset my computer as a sport.

    Looking for other people who may have experienced something similar so we can get some traction and get this properly looked at.

  7. Not sure if i should have posted this in the Map Holes post, though I dropped a comment linking this as well as this is not only visual but gamebreaking as well.

     

    I was using Titania capturing the Transit Depot in Orb Vallis when I suddenly fell fast to the ground and got stuck there in an animation loop, UI went crazy and almost dissapeared and couldnt move or shoot or do anything really. I tried the unstuck command but that didnt work, then i noticed I could actually move though really slowly, I drag myself to the nearest depresion i could see on the floor to see if maybe that would get me unstuck, thats when I noticed a hole in the map, and then immediately fell through it. After falling below the map y respawned at the entrance to the elevator as expected and tried to go back using the archwing, with the same results, even the k-drive is sucked and stuck to the floor. The archwing was the worst of them all, as I would start getting crush damage until dead. More details in the screenshots  (attached for support on ticket #1550921) below. (UPDATE: Just verified and optimized download cache and the bug is still there)

    Thats the hole right there, after passing the ledge you will get sucked to the ground

    MGF0Tcm.jpg

    This is with Razorwing on

    XBm2sjt.jpg

    I dragged my myself straight down to the border

    o2kg4x5.jpg

     

    And got a nice view

    .PriLm9u.jpg

     

    Got reset to the entrance

    pvDZTvg.jpg

     

    Tried the archwing got really close

    PkROco3.jpg

    And started falling fast

    dA8em6F.jpg

     

    And was crush to death

    2Yq9BrL.jpg

    This also affected the k-drive 

    GUTrCdF.jpg

  8. I can confirm this, seems to be broken at least on ODS, we were farming octavia used the run to also pick the vaults, but after the 20 minute mark passed we went to the vault and the mod would not be rewarded. As per the above advise, we just did a Capture Derelict and the mod dropped just fine.

×
×
  • Create New...