Enialyx Posted October 15, 2018 Share Posted October 15, 2018 Onkko's face is clipping through his mask. Wasn't so before the update. Link to comment Share on other sites More sharing options...
SaiSoul7895 Posted October 15, 2018 Share Posted October 15, 2018 My ember noggle disappeared immediately after placing it ( the noggle you get from doing the relay event ) and my lotus noggle has half her head missing. Only eyes are visible. Posted in the discord channel unable to post pic here for some reason. Link to comment Share on other sites More sharing options...
brunossgodinho Posted October 15, 2018 Share Posted October 15, 2018 (edited) 23 hours ago, brunossgodinho said: On the Arsenal I have been having the following problem: sometimes, when I open the upgrade window for the Warframe, the animation changes as usual but it does not bring up the mods allocation window. It does not display anything at all, just the faded background, as it would if mods windows had opened. I play with XBOX 360 controller and I cannot exit the screen through the controller commands, only through keyboard. Also, even if I manage to exit the screen, the right analog will get stuck: it doesn't move the camera. It works on the menu, however. I have been dealing with this exiting and opening the game again. This is what happens: Also this: Anyway, the game gets super stuck. Commands don't respond correctly either on XBOX controller or keyboard. Edited October 15, 2018 by brunossgodinho Adding infos Link to comment Share on other sites More sharing options...
Kuestenjung Posted October 15, 2018 Share Posted October 15, 2018 I just played an Onslaught Elite with Volt Prime and his 4. did only worked about half of the time I was using it. No damage dealt, no stun and no shields recovered from the augment. Link to comment Share on other sites More sharing options...
Sinon.... Posted October 15, 2018 Share Posted October 15, 2018 Just Discovered it now by finishing all of my alerts rendered the alert tab disappearing rendering cannot even participate the arbitration Link to comment Share on other sites More sharing options...
trunks013 Posted October 15, 2018 Share Posted October 15, 2018 2 minutes ago, Sinon.... said: Just Discovered it now by finishing all of my alerts rendered the alert tab disappearing rendering cannot even participate the arbitration Yeah but ifnot all finished can you do the arbitration ? ... ... get it ifnot ^.^ Link to comment Share on other sites More sharing options...
Sinon.... Posted October 15, 2018 Share Posted October 15, 2018 Well yeah but still you know a bug is still a bug haha XD Link to comment Share on other sites More sharing options...
trunks013 Posted October 15, 2018 Share Posted October 15, 2018 6 minutes ago, Sinon.... said: Well yeah but still you know a bug is still a bug haha XD Totaly i was just making a joke with your name Its a bug and should be fixed just to know if its not all completed is it still avaible is a piece of intel that can help ^.^ Link to comment Share on other sites More sharing options...
trunks013 Posted October 15, 2018 Share Posted October 15, 2018 24 minutes ago, brunossgodinho said: This is what happens: Also this: Anyway, the game gets super stuck. Commands don't respond correctly either on XBOX controller or keyboard. Well thats exactly my bug ^.^ Link to comment Share on other sites More sharing options...
Ikari_Sen Posted October 15, 2018 Share Posted October 15, 2018 I lost my ship decorations with the latest update, like gone from my orbiter and inventory. Including ones I placed after the update :( Link to comment Share on other sites More sharing options...
wenzzz2 Posted October 15, 2018 Share Posted October 15, 2018 Melee weapons are unable to be channeled if you start channeling while strafing with WASD. Seems to be able to start channeling if you do it while stationary or jumping/moving without WASD inputs. Link to comment Share on other sites More sharing options...
Sybarita Posted October 15, 2018 Share Posted October 15, 2018 Literally UNPLAYABLE! Link to comment Share on other sites More sharing options...
Kyrosiris Posted October 15, 2018 Share Posted October 15, 2018 Beyond just the undocumented gutjob nerf changes to how Arcane Victory works, it is also not triggering off of headshot kills with primary weapons or melee weapons. Link to comment Share on other sites More sharing options...
ZoneKun Posted October 15, 2018 Share Posted October 15, 2018 I caught a bug when the screen darkens in the game, and it gets dark everywhere except the menu, and this darkness subsides when you re-enter the game, and it is caused by improper combining of buttons, for example, I have an alternative fire on Tab, and resurrect and use F and when I press one of them these buttons, my screen is getting darker, I don’t know why this is possible with the initial binding of buttons. Although who knows, for example, I shoot with Azima with alternative fire and I get this bug Screenshots https://ibb.co/kDPOVfhttps://ibb.co/gDRFbLhttps://ibb.co/dR52O0https://ibb.co/bGgywLhttps://ibb.co/iqyNO0https://ibb.co/cfNSqfhttps://ibb.co/fQvfAfhttps://ibb.co/fRgywL Link to comment Share on other sites More sharing options...
Yusuriel Posted October 15, 2018 Share Posted October 15, 2018 Volt's Discharge doesnt seem to be working in Sanctuary Onslaught. As soon as the ability is cast only the flash of light is seen and the ability countdown is not seen. Enemies don't take damage and are not stunned. Trinity's 2 and 4 don't seem to work if Ember has her 4 activated or if Nekros has his Desecrate active. Link to comment Share on other sites More sharing options...
lDlragon Posted October 15, 2018 Share Posted October 15, 2018 10 hrs ago I was able to log in with no issues. Then now I tried to log in and now I'm having issues. What I have done so far: 1. Log in to the website to see if my password is still working. (Yes my password is still the same and I was able to log in to the website with no issues.) 2. Copied my password from a notepad. (It didn't work.) 3. Closed client and reopened the game. (Still having the error message.) 4. Tried resetting my IP and restarting my Router. (Didn't work) 5 Sent a ticket to DE support. (Still waiting for the reply) P.S. I've been having 2 issues for the past 5 days after and before the patch dropped. It all started with the Log in failed issue. Then few days after trying to log in there's another one Update failed. I'm still waiting for support to help me out with this. But this happened everytime a new main patch comes in. And as what I have noticed most SouthEast Asian players are having this issues. Link to comment Share on other sites More sharing options...
Catface777 Posted October 15, 2018 Share Posted October 15, 2018 (edited) Since the update all my ayatan sculptures that were placed in the orbiter are gone. Those that were in my inventory are still there and fine, but the others are just gone without a trace.I had all my sculptures in the observation room and I noticed that something was amiss when I began the quest. I tried relogging. Edited October 15, 2018 by Catface777 Link to comment Share on other sites More sharing options...
DustyFlash Posted October 15, 2018 Share Posted October 15, 2018 Tonkor Projectiles no longer explode on contact, only explode when they stop moving. This might be due to the changes to how projectiles work. And Melees can't be channeled while sprinting. They can be channeled while standing still or walking. Link to comment Share on other sites More sharing options...
Luvmyrii Posted October 15, 2018 Share Posted October 15, 2018 Whip melee (along with various other weapon) completely lose momentum when using slide attack. We completely lose fluidity using melee weapon. 1 Link to comment Share on other sites More sharing options...
richardtrle Posted October 15, 2018 Share Posted October 15, 2018 (edited) Modding Paracesis with Condition Overload halves its stats. Sometimes buffs to frames and weapons on arbitrations simply don't work as intended. Enemy spawn rate, ai path tracing is bugged, enemy spawns at a lower and unpredictable rate (e.g.: enemies in exterminate spawn by the end of the tileset), and enemies are moving slower or are becoming stucked along their initial route. /edit Whips are acting wonky and channeling can only be activated while standing still Edited October 15, 2018 by richardtrle addin more bugs Link to comment Share on other sites More sharing options...
Toothit Posted October 15, 2018 Share Posted October 15, 2018 Host migration occurred while extracting in an Arbitration. The host left the squad and my remaining 2 teammates got their rewards while I didn't. Link to comment Share on other sites More sharing options...
richardtrle Posted October 15, 2018 Share Posted October 15, 2018 35 minutes ago, Catface777 said: Since the update all my ayatan sculptures that were placed in the orbiter are gone. Those that were in my inventory are still there and fine, but the others are just gone without a trace.I had all my sculptures in the observation room and I noticed that something was amiss when I began the quest. I tried relogging. Submit a report ticket to them, they may be able to refund or rollback Link to comment Share on other sites More sharing options...
iTRF Posted October 15, 2018 Share Posted October 15, 2018 https://youtu.be/qXWR3YWOpPE Link to comment Share on other sites More sharing options...
TauAlphaC Posted October 15, 2018 Share Posted October 15, 2018 On 2018-10-14 at 9:13 AM, Technolich said: Helios Prime does not seem to scan anymore. I tested on multiple Somachord Tones and Frame Fighter Datas. I had both synthesis scanners and codex scanners in my gear wheel, waited for a few minutes at various positions next to the unscanned objects. Helios Prime refused to scan them. This also happened to me. Helios will not scan tones/data/fragments, and inconsistently scans targets not complete in my codex. I also have difficulty when attempting to equip a scanner (codex or synthesis) from the new gear wheel. When attempting to equip from the 1 spot in the gear wheel, I will instead switch to unarmed. It will take multiple attempts to equip the scanner. Placing the scanner in another position in the wheel (not 1) alleviates this, but not perfectly. My clan mates also report similar difficulties. Link to comment Share on other sites More sharing options...
FortressWill Posted October 15, 2018 Share Posted October 15, 2018 I posted on page 14 of this thread about a decoration I placed disappearing and the rest still being around. Well, now they've all disappeared... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now