Jump to content
[DE]Helen

Venetian Carnival Contest [Winners Announced]!

Recommended Posts

Rip it came out sideways. I took inspiration from the design of the ceramic jars lying around Cetus.I was also inspired by the tower that those bois harvest.   

 

6SEhaxd.jpg

  • Like 4
  • Upvote 10

Share this post


Link to post
Share on other sites

Since it was from cetus, decided on using the most common sentient on the plains for inspiration, the vomvalyst, didn't really need too much work to make into a mask but I drew it a bit more simple and crude since it's hand made 579f9N7.jpg

  • Like 3
  • Applause 1
  • Upvote 11

Share this post


Link to post
Share on other sites
1 hour ago, Plushy said:

Add a little roller bomb and it'll be perfect.

I dont understand that, i think is because i dont speak english. Can you explain me what its a roller bomb? please

Share this post


Link to post
Share on other sites
7 minutes ago, mihreva said:

Since it was from cetus, decided on using the most common sentient on the plains for inspiration, the vomvalyst, didn't really need too much work to make into a mask but I drew it a bit more simple and crude since it's hand made 579f9N7.jpg

I’d buy this. I’d DEFINITELY buy this.

Share this post


Link to post
Share on other sites
5 minutes ago, HugintheCrow said:

From the Warframe wiki:

muttea.png

But i want the clem mask, no the regular grineer xD

Share this post


Link to post
Share on other sites
5 minutes ago, Vordavos said:

But i want the clem mask, no the regular grineer xD

That's the same thing. Clem is just a regular lancer.

Share this post


Link to post
Share on other sites

This design was inspired by Phantom of the Opera, yet keeping a sci-fi theme in mind.

Description:

"Battle-Hacks", Masquerade inspired mask for Warframe Contest.

The right eye is a spherical, functional blip radar (to keep track of party-goers of course, yet also effective in field surveillance.)IMG-20190215-184221.jpgWhile the left eye displays descriptive information of the wearers surroundings. The sides have slots for ears, and the mask wraps fully around the head, including a secure top strap. Metallic steel finish.

Thanks for the consideration.

-Blazinghawk777

  • Like 3
  • Applause 1
  • Upvote 7

Share this post


Link to post
Share on other sites

WIN_20190215_170550.JPG

Looked around at the Ostron's stuff for inspiration, noted some oceanic/fish design cues mixed with Orokin medallions, so I decided to work based on that.

Pardon the lack of symmetry on the whole mask, my only real regret was that I made the fish-related stuff too subtle in comparison to the Orokin stuff.

  • Like 1
  • Upvote 4

Share this post


Link to post
Share on other sites

Haku Mask
haku_m11.png

 

Orokin words: Tenno
This mask is a reference to Haku from Naruto
Original: 

Spoiler

haku_o10.jpg

 

Edited by GermanNintendo
  • Like 5
  • Woah 1
  • Applause 2
  • Upvote 10

Share this post


Link to post
Share on other sites

Alright, so originally I had a completely different idea that ended up looking more Orokin in design. After messing around I came up with this. I was thinking the leaves were wood, not actual plant matter. I'm not good with drawing so I wasn't able to add in finer details like stress or chisel marks around the main part of the mask. 

edit: I didn't realize the picture would be this big, my bad.

 

nX4qB2r.jpg

Edited by pfft_as_if
  • Upvote 5

Share this post


Link to post
Share on other sites

second idea with other color but i dont really like that much as the first one (looks little like a chicken but maybe thats funny because carneval i guess xD)

hGaTbaz.jpg

  • Upvote 2

Share this post


Link to post
Share on other sites

I've put the text that is in the image below under this spoiler. Incase you are unable to read the text on the image and to save clogging up the thread. 
 

Spoiler

 

Hello! This is my submission for the contest. My name is LizzardTales. I gathered some research and inspirational material by moving around Cetus and really studying the life style there. After thinking long and hard about what to base the mask around, I thought that the Eidolon Vomvalyst would suit a mask perfectly. I’ve tried to demonstrate how it would be built, painted and designed by hand. Tying in the strong Ostron culture as well as the interesting design of the Vomvalyst. As a note, the face and the blank eyes are to show how it would sit on the face and is not part of the final design.

Here I have numbered specific areas on the mask I would like to make note of:

  1.  These two beams represent the Eidolon Vomvalyst’s rods. They are meant to be several small rods that have had the top capped to form the shape.
  2. This part is a simple ribbon connected by a ring in the Ostron style. Giving the mask some fun physics, keeping it with in the correct style and demonstrating the Vomvalyst’s ‘claws/arms’ if you will.
  3. This part is not flush with the front of the mask, pushed back slightly into the material via a press. Then inset five times into this section (and the four rods) are fragments of Azurite. A common gem on the plains, tying it back to Cetus. This also helps demonstrate the glowing parts of the Vomvalyst.
  4. The lack of a head strap. I wasn’t sure if the masks affixed to the tenno are via a strap or not, as some cosmetics are and some aren’t. So I left this area blank as it is more visually appealing.

This greyscale section of this concept/competition page is to show the 3D aspect of the mask. I am showing you how the mask has depth to it and that it is not all flat. I have painted this rather than sculpting as I am not knowledgeable with 3D modeling programs. However I feel like it gets the point across.

Finally, here is a rough colour guide that I think works best. I’ve kept it to four main colours. Red, Navy, Yellow and Bright Blue. I’ve chosen these as they are not only common Ostron colours, they are also on the Vomvalyst. Underneath is plain grey, showing the the colours on the mask have been painted on much like Nakak’s other wears. The only solid colour is with in the solid ring and ribbon. I created a paper mache esq texture to show that it has been built by hand. Created by LizzardTales(Eli Collyer) for the Warframe Venetian Carnival Contest.

 

 

87v7fYr.jpg

  • Like 8
  • Upvote 16

Share this post


Link to post
Share on other sites

hunhow_mask_by_godinthere_dczuq7z-fullvihttps://images-wixmp-ed30a86b8c4ca887773594c2.wixmp.com/intermediary/f/745a9bce-f4be-4f69-8785-ae932624ba2d/dczuq7z-79f32270-182f-4271-989a-10f28559f580.jpg/v1/fill/w_600,h_1067,q_70,strp/hunhow_mask_by_godinthere_dczuq7z-fullview.jpg

White one is for eyes when they want see front.

Looks make hunhows (or his sentient minions) face. And yellow grey silk cover the face.

Edited by GoDinthere
  • Like 2
  • Haha 1
  • Upvote 1

Share this post


Link to post
Share on other sites

https://imgur.com/a/IO50C4H

the idea behind my mask is beauty. the mask that i designed give then impression of a beautiful spirit resides within unyielding will to fight with bravery 

and i represent the beautiful spirit through the mask and i put {{eye hole}}  cause , did you know that the door to living spirit is the eyes

as for the horns it might need some tweeking but what it mean is the tough and unyielding furious spirit to fight and defend for what is all right and equal  

Edited by KAMI7SINS
sorry i didnt put and image nor a comment

Share this post


Link to post
Share on other sites

Greetings. This is my first time doing something for an online contest. My husband loves birbs (as do I), so I was motivated to see this mask on his operator and my operator.

condropon-concurso2019-byLordBakal.png

Name of the item: Condropon

Spoiler

(from "condroc" and from Ancient Greek πρόσωπον (prósōpon, “face, person”).

Since I was thinking how Nakak would get the materials from around Cetus:

- The rings are from a broken Ayatan statue.

- The feathers, of course, readily available from condrocs' shedding or from plucking at the kitchen.

- The bill is from kitchen's leftovers too.

- The "wing talon" is actually a regular talon tip (because the real wing talon is just too large).

- The feathers pointing downwards are from a condroc's tail.

- The feathers for the crown are gathered from Rogue Condroc's down, used by females to furbish the inside of the nest to keep their clutch warm while hunting prey.

- The "base" of the mask is made from hand-picked cracked-jug parts (not necesarily symmetric; actually, the cracks should be more asymmetric), gilded anew together into a new shape.

- Some leather parts to make the inside of the mask comfortable to wear while giving form to the brows and eye sockets of the condroc (also as a base to glue the feathers together).

- The eyelids are painted to display your love with a streak of vermillion.

- The blue paint represents the sky and the winds.

- The red paints represents the predator and the blood from their prey.

- And jute rope to afix it to your wonderful face.

 

The physics would be on the feather tips, the Orokin rings and strand-particle system for the feather crown (because hubby asked for it to be as fluffiest as possible).

 

Hope [DE] can fix the frontal-to-profile perspective. I fail horribly at translating frontal views to profile views 😞

Cheers from Canary Islands o/

Edited by LordBakal
Formating is a pain D:
  • Like 21
  • Upvote 32

Share this post


Link to post
Share on other sites

 

BjIGVGw.png
Kavat Mask! I don't know what to write for this

Show off your ferocity and animal admiration with this mask! 

(bf gave me the idea)

Edited by edgeleopard
FINALLY I GOT THE PIC IN
  • Like 5
  • Applause 3
  • Upvote 16

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×
×
  • Create New...