Solo Tridolon Build Trinity/Rubico/Adarza

[(PSN)KhaosWolf94]

I can solo the first two but run out of time before doing the hydrolist. I do 3x3 caps often and am pretty good at my job.

My issue is damage, i'm running a rubico prime Adarza kavat and r3 avenger and a max void strike with a few way bounds for operator survival. Is there anything I can do to get my damage up to make these fights faster. Post build suggestions please. No rivens. Thanks.

[Bostew]

maybe use shield volt to maximize your damage, if your carefull enough you'll don't need to heal the lures. 

Also, you're lacking damge to take down the shields or the synovias??

[KnossosTNC]

Well, I use the Lanka with Heavy Caliber, Vile Acceleration and maximum zoom for max crit chance bonus. I've also been using Carrier Prime with Sweeper Prime modded with four Vigilante mods for an extra boost. A bit tricky to use, but I do my daily solo set in about 25 minutes.

What are the rest of your gear? Do you have a Riven on your Rubico Prime? I hear you need a Riven to make that viable for Tridolon.

Edited July 27, 2019 by KnossosTNC

[EpicD]

Rubico Prime doesn't need a riven do to a solo tricap. It helps but not needed.

Only thing i can recommend is having a high comber counter on the rubico for the damage boost. Keep it at 3x combo if you can. you might need ammo pads.

Sarpa with shattering impact to remove the armor. you only need 5 shots.

Without Volt's shield you lacking a good crit multiplier to take out a eido's shield in a reasonable fashion. so it will take a while.

[taiiat]

consider using Arcane Arachne. double Nullifier is definitely a lot more convenient but it's an option for Damage.
Vigorous Swap may also be interesting.

keep your Hit Counter up, try to not waste Void Strike Charges if you can help it but don't save them so long that nighttime ends.

Shattering Impact can easily about quadruple your Damage, so it's nice to use. even just the basic 6 Bursts with Sarpa and stop lazy method is already about 4x Damage. but you could run up and hit it directly 3 more times if you want to get a bit more.

 

ofcourse a bit impact is how many Void Strike Charges you need to use for each phase. the ideal is ofcourse to minimize them, so as few shots for Shields as possible so that you can still quickly deal with the Health Phase.

 

31 minutes ago, EpicD said:

Sarpa with shattering impact to remove the armor. you only need 5 shots.

er, i think you mean 6.
6 * 5 == 30
200 / 30 == 6.666r
(6 Bursts removes 180/200)

[(PSN)KhaosWolf94]

I found the issue I was having.

I was running sharpened claws on my adarza kavat. And i got no radiation bonus for it which nerfed my dps. After making a dedicated eidolon set up for my adarza I deal much better damage during my last 3x3.

Feeling pretty confident now. Wish me luck.

[(PSN)KhaosWolf94]

On 2019-07-26 at 10:31 PM, KnossosTNC said:

Well, I use the Lanka with Heavy Caliber, Vile Acceleration and maximum zoom for max crit chance bonus. I've also been using Carrier Prime with Sweeper Prime modded with four Vigilante mods for an extra boost. A bit tricky to use, but I do my daily solo set in about 25 minutes.

What are the rest of your gear? Do you have a Riven on your Rubico Prime? I hear you need a Riven to make that viable for Tridolon.

Trinity Prime Basic Meta Tricap Build modified to fit my playstyle and damage.

Rubico Prime Radiation build 95% Crit chance 6.6x Multiplier

Adarza Critty Kitty With tek enhance and survival mods

And Redeemer Prime radiation build incase I run out of ammo/ammo pizza.

Max Madurai 2-2-3 Amp with Virtuous Shadow.

Based on replies it looks like i'm on the right track, it just needs to be optimized.

Gonna switch to the sarpa with Shat-Imp. Removed my sharpened claws on adarza. Added vigorous swap. I'll post my results after I build a sarpa.