AtomicWaffle14 Posted May 9, 2020 Share Posted May 9, 2020 Operator Void Mode Crewship Bug TYPE: In-Game / Railjack (Operator) DESCRIPTION: I was using my Operator in Void Mode (invisible) to hack a Crewship's reactor. My squadmate, piloting our Railjack, used the Artillery to destroy the Crewship I was in. I then became truly invisible, could not access any UI functions (including Esc, Map, Tactical Menu, Player List, Mission Progress), and could only slowly move around on a single plane in space. I asked my squadmate to move the Railjack close to my so I could try and board, but no prompt came up. Once my squadmate finished the mission, I got an incomplete Mission Success screen, and was still invisible. My squadmate could not load into the Dry Dock until I force-closed the game with Task Manager. VISUAL: Spoiler REPRODUCTION: Hack into a Crewship reactor while in Operator Void mode. Before completing the hack, have a squadmate destroy the crewship from the outside. EXPECTED RESULT: I should have been booted out into Archwing Mode like when a Crewship meltdown occurs before you escape it. OBSERVED RESULT: I was stuck in a weird operator mode in the middle of space, and couldn't do anything. REPRODUCTION RATE: I have not had the chance to reproduce this yet. Link to comment Share on other sites More sharing options...
0x62 Posted May 9, 2020 Share Posted May 9, 2020 TYPE: In-game DESCRIPTION: Void Dashing into Murex Tunnel incorrectly combines the two animations (murex tunnel and void dash) causing the player to overshoot and continuously hit a death plane. After (what i assume is the murex tunnel animation) it finishes, the operator is stuck walking on an invisible plane. This plane can change if the operator bonks on something above to go slightly lower, or step on an elevation to go higher. The only interaction available is to open the menu, or voice chat. You cannot leave the murex even though you get a prompt to. Dying send you back to your war frame, where you can then travel through the murex tunnel again. However, swapping back to operator produces the same previous result, except for the invisible plane (flight mode is gone). I didn't test to see if the warframe can do anything. VISUAL: https://gyazo.com/46561df9b339b6da671d9fc8a28db9c7 "Murex Tunnel" in the background. I can't show it up close, since I can't jump/dash closer. REPRODUCTION: Dash into Murex Tunnel EXPECTED RESULT: Murex Tunnel animation takes priority over void dash. OBSERVED RESULT: Murex Tunnel animation and void dash animation combine, glitching the player out REPRODUCTION RATE: 100% Link to comment Share on other sites More sharing options...
at35z Posted May 9, 2020 Share Posted May 9, 2020 On 2020-05-01 at 7:09 PM, at35z said: TYPE: In-Game DESCRIPTION: I was using Paracesis with Cleaving Whirlwind stance VISUAL: N/A REPRODUCTION: Use Paracesis with Cleaving Whirlwind stance and press melee attack repeatedly EXPECTED RESULT: The weapon should continue to work and perform melee combos normally OBSERVED RESULT: After a couple presses of Melee Attack (E key), I first lose control of the melee weapon, more continued presses cause me to lose control of my warframe entirely, it's stuck doing whatever it was doing (walking/runnin towards the same direction, etc) and unable to attack. The camera can be moved around, but I lose every keyboard control (including chat and Esc menu). Waiting a bit allows me to press Esc twice to open and close the menu, which fixes the issue until I start using melee again. REPRODUCTION RATE: It happens all the time, with any warframe, in any mission. This only started happening since the past couple updates. I would like to update this. I discovered that it's not linked to any specific weapon or stance mod, but rather the use of more parkour moves in succession. If I Slide, bullet jump, then use melee, it immediately freezes my controls, my warframe just walks forward and cannot attack or stop. This continues to be completely game breaking bc I completely lose control over my character and I cannot use melee as long as this bug is present in the game. Link to comment Share on other sites More sharing options...
0x62 Posted May 9, 2020 Share Posted May 9, 2020 3 hours ago, AtomicWaffle14 said: Operator Void Mode Crewship Bug TYPE: In-Game / Railjack (Operator) DESCRIPTION: I was using my Operator in Void Mode (invisible) to hack a Crewship's reactor. My squadmate, piloting our Railjack, used the Artillery to destroy the Crewship I was in. I then became truly invisible, could not access any UI functions (including Esc, Map, Tactical Menu, Player List, Mission Progress), and could only slowly move around on a single plane in space. I asked my squadmate to move the Railjack close to my so I could try and board, but no prompt came up. Once my squadmate finished the mission, I got an incomplete Mission Success screen, and was still invisible. My squadmate could not load into the Dry Dock until I force-closed the game with Task Manager. VISUAL: Reveal hidden contents REPRODUCTION: Hack into a Crewship reactor while in Operator Void mode. Before completing the hack, have a squadmate destroy the crewship from the outside. EXPECTED RESULT: I should have been booted out into Archwing Mode like when a Crewship meltdown occurs before you escape it. OBSERVED RESULT: I was stuck in a weird operator mode in the middle of space, and couldn't do anything. REPRODUCTION RATE: I have not had the chance to reproduce this yet. TYPE: In-game DESCRIPTION: Was able to replicate just by being in void mode while crewship was exploding. From what, I am not exactly sure. I had Tac 10 teleport to my crewmate to attempt to revive him. The crewship exploded and I was stuck in the same scenario. VISUAL: None REPRODUCTION: Be in void mode while crewship explodes (potentially only from fwd arti?) EXPECTED RESULT: Booted to Archwing mode on crewship explode. OBSERVED RESULT: Stuck on single plane in space with an invisible operator that can't move or interact. REPRODUCTION RATE: counting the previous post, 2 times. Will edit if i reproduce. Afterward: To replicate, it seems like I must beable to void mode on the perfect frame the crewship explodes from fwd arti. Reactor explosion seems to force your operator into warframe no matter how hard i try to use operator, so that rules that out. This has a semi-low reproduction rate: I have done this about a total of 3 times intentionally looking for this bug (8 total attempts? i can't remember). "Form Up" avionics can help pull the operator back into the ship, but that's about it. This bug will definitely prevent the player from entering dojo. Link to comment Share on other sites More sharing options...
Cid_86 Posted May 9, 2020 Share Posted May 9, 2020 On 2020-05-01 at 9:04 AM, SmokinMoses said: TYPE: [RJ Configuration] DESCRIPTION: 90% my avionics are gone. I lost so much progress. VISUAL: None REPRODUCTION: None - simply launched the game after the update. EXPECTED RESULT: Having my full loadout of maxed avionics where I left them. OBSERVED RESULT: Lost most of them. REPRODUCTION RATE: Non-applicable I guess. same all avionics ar gone...... TYPE: [RJ Configuration] DESCRIPTION: All of my INTEGRATED avionics who where above rank 0 are gone. Lost much progress and resources. BATTLE and TACTICAL still there VISUAL: none, i should have done a screen of my previous avionics, bud didn't expect this REPRODUCTION: I log in and check dojo EXPECTED RESULT: Having my avionics where i put them OBSERVED RESULT: Lost all ranked INTEGRATED avionics REPRODUCTION RATE: I guess non replicable Link to comment Share on other sites More sharing options...
kyori Posted May 9, 2020 Share Posted May 9, 2020 On 2020-05-03 at 11:37 AM, Vit0Corleone said: Weird bug with Railjack suddenly dropping from full health to 10 health, no warnings, no breaches, nothing. Returning to Railjack resulted in mission failure Park your RJ at least 5-6km away from the POIs and they won't send Ramsleds. That might help. But it's true that CY is programmed to be a troll and not notify players of a bomb planted if the players are not in the RJ at the time. EDIT: Do you know that CY didn't even... has never inform the players about ramsleds hit and boarding parties in the RJ, when players are not in the RJ. Link to comment Share on other sites More sharing options...
TreasureTurtle Posted May 9, 2020 Share Posted May 9, 2020 apologies, it turns out what I posted wasn't a bug Link to comment Share on other sites More sharing options...
0x62 Posted May 9, 2020 Share Posted May 9, 2020 51 minutes ago, Cid_86 said: same all avionics ar gone...... TYPE: [RJ Configuration] DESCRIPTION: All of my INTEGRATED avionics who where above rank 0 are gone. Lost much progress and resources. BATTLE and TACTICAL still there VISUAL: none, i should have done a screen of my previous avionics, bud didn't expect this REPRODUCTION: I log in and check dojo EXPECTED RESULT: Having my avionics where i put them OBSERVED RESULT: Lost all ranked INTEGRATED avionics REPRODUCTION RATE: I guess non replicable Read this thread, under avionics section: The ‘retired’ Integrated Avionics will be removed from players inventory via a script on login. The remaining Integrated Avionic for each Type will take on the values of the previously highest valued Avionic of its Type. ALL Dirac used to upgrade Integrated Avionics will be refunded. This applies to both retired and remaining Avionics. ALL remaining Integrated Avionics will have their Upgrades drained. Link to comment Share on other sites More sharing options...
M4T2E Posted May 9, 2020 Share Posted May 9, 2020 TYPE: In-GameDESCRIPTION: no access to Components & Armaments inventoryVISUAL: N/AREPRODUCTION: try to find the current amount of owned Components & Armaments inventory slotsEXPECTED RESULT: access to Components & Armaments section on "ESC" > "Equipment" > "Inventory", where I can see all my other items and slots (warframes, weapons, robotics, archwing, ...)OBSERVED RESULT: tried to claim a repaired item and got a message for insufficient inventory space; can't find any access to a list of my current amount of slotsREPRODUCTION RATE: always There is no information about the default number of slots I own and why I can't remove the default items that I don't need anymore. Currently I have the 6 default items and successfully claimed 11 repaired items, what also seems to be a suspect number (11 resp. 17) for the base slots. Link to comment Share on other sites More sharing options...
0x62 Posted May 9, 2020 Share Posted May 9, 2020 TYPE: In Game DESCRIPTION: Tac 10 teleport and Slingshot don't mix VISUAL: End result: https://gyazo.com/72ba83ea62715bc51a03df82a353cfbb REPRODUCTION: Slingshot to somewhere. While doing so, Tac 10 teleport (destination can be on land or archwing) EXPECTED RESULT: Tac 10 should override the player's indecision, canceling the slingshot and properly finishing the warp. OBSERVED RESULT: Player is locked in place, unable to do anything, continuously sliding forward. REPRODUCTION RATE: 100% Link to comment Share on other sites More sharing options...
Cid_86 Posted May 9, 2020 Share Posted May 9, 2020 7 hours ago, 0x62 said: Read this thread, under avionics section: The ‘retired’ Integrated Avionics will be removed from players inventory via a script on login. The remaining Integrated Avionic for each Type will take on the values of the previously highest valued Avionic of its Type. ALL Dirac used to upgrade Integrated Avionics will be refunded. This applies to both retired and remaining Avionics. ALL remaining Integrated Avionics will have their Upgrades drained. oh so im still #*!%....great Link to comment Share on other sites More sharing options...
--DSP--Snapshane Posted May 9, 2020 Share Posted May 9, 2020 TYPE: [RJ Configuration] DESCRIPTION: All of my INTEGRATED avionics who where above rank 0 are gone. Lost much progress and resources. BATTLE and TACTICAL still there. I had zektis bulkhead,hulweave,hyperstrike,section density, forward artillery, VISUAL: REPRODUCTION: none, just went do dojo to chech after update EXPECTED RESULT: Having my avionics where i put them OBSERVED RESULT: Lost all ranked INTEGRATED avionics REPRODUCTION RATE: I guess non replicable Link to comment Share on other sites More sharing options...
__jag__ Posted May 9, 2020 Share Posted May 9, 2020 1 hour ago, Cid_86 said: oh so im still #*!%....great It's a bit of a pain in the ass, but you should be able to get your old build (or better) back with everything in your inventory. All they did is take the best version of each Avionic and slap a random house name on it, then converted all the old ones to this new avionic. So e.g. old Zetki Bulkhead (best) has become the new Vidar Bulkhead (same stats as old Zetki) and all old Bulkheads you owned have been converted to the new one. Any Dirac for upgrades has been refunded, so all you have to do is install the Avionics you want, upgrade them, and you're good to go. As a bonus, some of them use a bit less capacity, so you might be able to fit more Avionics or higher upgrades in. Yes, it sucks having to figure out your build again, but in return for a few minutes of your time your ship should come out as good as before, or even better. For example, my old build had 3 capacity to spare, if I upgrade the new Avionics just enough to roughly match my old build, I still have 17 capacity left, and if I fully upgrade everything, I have 10 drain left and better stats than before. Link to comment Share on other sites More sharing options...
__jag__ Posted May 9, 2020 Share Posted May 9, 2020 37 minutes ago, --DSP--Snapshane said: OBSERVED RESULT: Lost all ranked INTEGRATED avionics See my response to Cid_86 above. TL;DR: there's a new system -- one house per avionic -- which has copied the "best in slot" stats from the old system, uses less capacity, and all your old avionics have been converted to the new system and put back in your inventory. Any Dirac spent on upgrades to those old avionics has been refunded, and just this once you'll have to sit down for a few minutes, re-do your build using the new system, and upgrade the new avionics using your refunded Dirac. Link to comment Share on other sites More sharing options...
0x62 Posted May 9, 2020 Share Posted May 9, 2020 2 hours ago, Cid_86 said: oh so im still #*!%....great Just rebuild the ones you want. "Integrated Avionics will have their Upgrades drained." means that they started you with a clean slate and now have only rank zero avionics. They have also refunded you with the dirac for the previous ranked avionics Link to comment Share on other sites More sharing options...
CaineMayler Posted May 10, 2020 Share Posted May 10, 2020 TYPE: In-Game - Railjack DESCRIPTION: Returning to the dry dock with particle ram active keeps particle ram effect displaying in to rooms of the dojo VISUAL: REPRODUCTION: Return to the dojo with particle ram ability active EXPECTED RESULT: No particle ram effect visible OBSERVED RESULT: Particle ram effect visible REPRODUCTION RATE: every time Link to comment Share on other sites More sharing options...
3XOUT Posted May 10, 2020 Share Posted May 10, 2020 Tactical Menu UI TYPE: UI DESCRIPTION: Opening the Tactical menu VISUAL: https://imgur.com/HTLtzB8 (video from GeForce NOW, but it's the same on my own PC) REPRODUCTION: Just open your tactical menu and you'll see the UI is all over the place, depending on your own position. EXPECTED RESULT: Expected the UI RJ minimap to be fixed in a good position OBSERVED RESULT: The UI RJ minimap is either too high or too low REPRODUCTION RATE: 100 % Link to comment Share on other sites More sharing options...
Lockhart77 Posted May 10, 2020 Share Posted May 10, 2020 TYPE: In-Game Railjack DESCRIPTION: Unintended interaction between : Tactical 3 Command Link, Tactical 5 Overseer, Engineering 10 Anastasis ? REPRODUCTION: Opening tactical interface > spectate player inside the railjack (this changes the map/tactical map into the railjack one instead of the current thing you're boarding) > click a quick travel node inside the railjack > instantly teleported into the railjack and Open tactical interface > spectate player inside the railjack to change the tactical map layout to be railjack > click on a hazard (fire, electric, breach etc) and it will still trigger the remote repair EXPECTED RESULT: where tact 3 lets you teleport inside the railjack for faster in-ship travel and Overseer lets you spectate other players. This somehow leads to a condition where if you were to be outside the railjack, be it in archwing or boarding a mission objective/crewship, you can just teleport right back into the ship. This also allows you to do remote repair in the most convenient way when you have engineering 10 when you're away on an objective or archwing or boarding OBSERVED RESULT: Allows player to teleport directly into railjack fast travel nodes, without having to use omni tool. Allow player to do remote repair when outside of the railjack by spectating other player to switch the tactical map and clicking on hazard. REPRODUCTION RATE: 90%~ish, some recreation sometimes have the tactical layout without showing the quick travel node nor hazards that exist in the ship, leading to unable to teleport via fast travel node or remote fixing a hazard I just feel like this isn't an intended feature so 🤷♂️ Link to comment Share on other sites More sharing options...
Vit0Corleone Posted May 10, 2020 Share Posted May 10, 2020 13 minutes ago, Lockhart77 said: TYPE: In-Game Railjack DESCRIPTION: Unintended interaction between : Tactical 3 Command Link, Tactical 5 Overseer, Engineering 10 Anastasis ? REPRODUCTION: Opening tactical interface > spectate player inside the railjack (this changes the map/tactical map into the railjack one instead of the current thing you're boarding) > click a quick travel node inside the railjack > instantly teleported into the railjack and Open tactical interface > spectate player inside the railjack to change the tactical map layout to be railjack > click on a hazard (fire, electric, breach etc) and it will still trigger the remote repair EXPECTED RESULT: where tact 3 lets you teleport inside the railjack for faster in-ship travel and Overseer lets you spectate other players. This somehow leads to a condition where if you were to be outside the railjack, be it in archwing or boarding a mission objective/crewship, you can just teleport right back into the ship. This also allows you to do remote repair in the most convenient way when you have engineering 10 when you're away on an objective or archwing or boarding OBSERVED RESULT: Allows player to teleport directly into railjack fast travel nodes, without having to use omni tool. Allow player to do remote repair when outside of the railjack by spectating other player to switch the tactical map and clicking on hazard. REPRODUCTION RATE: 90%~ish, some recreation sometimes have the tactical layout without showing the quick travel node nor hazards that exist in the ship, leading to unable to teleport via fast travel node or remote fixing a hazard I just feel like this isn't an intended feature so 🤷♂️ Being able to remote repair/hack on the area your team members are, is actually what they presented at Tennocon, so looks like intended to me. Link to comment Share on other sites More sharing options...
3XOUT Posted May 10, 2020 Share Posted May 10, 2020 Railjack Components - Vidar Shield Array Passive not working TYPE: In-game DESCRIPTION: In a Railjack mission testing different components. The Vidar Shield Array with the 50 energy to shield per kill is not working. As you see in the video below (1750 shields/maxed Vidar) VISUAL: https://imgur.com/a/BJnxwxJ REPRODUCTION: Equip Vidar Shield Array with the same passive, and test in mission. 🙂 EXPECTED RESULT: Killing 10 enemies should visibly charge my shield 500 energy, or show at least some form of change even if I'm getting shot at the same time. OBSERVED RESULT: No change in shield energy amount on kills REPRODUCTION RATE: 100 % Link to comment Share on other sites More sharing options...
3XOUT Posted May 10, 2020 Share Posted May 10, 2020 Reset of toggle controls in Railjack (maybe everywhere?) TYPE: In-game DESCRIPTION: In Railjack mission on my ship, getting in an out of pilot seat to do stuff (as you do) VISUAL: https://imgur.com/NjO9cPm REPRODUCTION: Get in any turret or similar with sprint or another similar toggled on, and then get out of the turret EXPECTED RESULT: Still have the toggle I chose OBSERVED RESULT: All toggles are reset REPRODUCTION RATE: 100 % Link to comment Share on other sites More sharing options...
Lokinne Posted May 10, 2020 Share Posted May 10, 2020 Closing Avionics Menu from the Dry Dock locks the UI. TYPE: In-game DESCRIPTION: In the Avionics section of the Railjack Configuration menu, one of the text boxes with information about the selected Avionic stays in place after closing the menu and locks the UI and controls, forcing me to close the game with Task Manager on Windows 10. REPRODUCTION: Closing the Railjack Configuration from the Avionics tab on the Dry Dock. EXPECTED RESULT: Just closing the menu without the textbox lingering there and locking up the controls and UIs. OBSERVED RESULT: The selected Avionic's textbox lingers around the screen but it can't be closed and the game locks. REPRODUCTION RATE: 50% Link to comment Share on other sites More sharing options...
MARALOHK Posted May 10, 2020 Share Posted May 10, 2020 TYPE: Railjack Point of Interest, Shipkiller Platform DESCRIPTION: Disabling the Shipkiller Platform can leave the giant laser constantly firing for the rest of the mission. REPRODUCTION: Seems to happen when the Shipkiller Platform is disabled while the giant laser is firing. EXPECTED RESULT: Expected the laser to be disabled. OBSERVED RESULT: IMMA FIRIN' MAH LAZER (It didn't turn off) REPRODUCTION RATE: 100% given the right timing, I'm reasonably sure. Link to comment Share on other sites More sharing options...
Murcia1 Posted May 10, 2020 Share Posted May 10, 2020 En 1/5/2020 a las 9:54, TienAnnen dijo: TYPE: [RJ Configuration] DESCRIPTION: 80% of my avionics are gone. Like Bulkhead, Hyperflux etc... the same thing happens to me 😞 screenshot Link to comment Share on other sites More sharing options...
Grief Posted May 10, 2020 Share Posted May 10, 2020 All of the avionics I had on my ship have disappeared Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.