(PSN)aRcTiC_PhAmToM Posted January 31, 2014 Share Posted January 31, 2014 I need Help fixing my strict nat on warframe. It comes up with options to click on to help resolve my strict nat when i open warframe on ps4 and i choose option 2 saying 'How do I turn on UPnP in Warframe? it then says ' click on the little gear in the top right corner of the start map'. I am having trouble finding the star map? Any bit of help would be much appreciated Link to comment Share on other sites More sharing options...
tantananan Posted January 31, 2014 Share Posted January 31, 2014 (edited) I have absolutely no idea how to fix this on a PS4 since I dont have one. This is what I used to fix my nat issues on my PC: http://portforward.com/english/applications/port_forwarding/Warframe/ Edit: 2 days. They still don't know I'm not a PS4 user. Edited February 2, 2014 by tantananan Link to comment Share on other sites More sharing options...
Tulzscha Posted January 31, 2014 Share Posted January 31, 2014 Moved to the proper section, so your fellow PS4 players can help. Link to comment Share on other sites More sharing options...
(PSN)beerninja88 Posted January 31, 2014 Share Posted January 31, 2014 (edited) I need Help fixing my strict nat on warframe. It comes up with options to click on to help resolve my strict nat when i open warframe on ps4 and i choose option 2 saying 'http://192.168.0.1 or sometimes http://192.168.1.1 Once you are in the router setting you need to look for a UPNP checkbox and check it. Also I would recommend updating your router's firmware to the latest version which can often increase speed and fix connection problems. To get the latest firmware, go to the website of whoever makes your router and search for your model number. If you did everything correctly then when you run a connection test on PS4 it should say NAT type 2 which is good. Type 2 means open NAT which is the best you can get. Edited January 31, 2014 by (PS4)beerninja88 Link to comment Share on other sites More sharing options...
(PSN)aRcTiC_PhAmToM Posted February 1, 2014 Author Share Posted February 1, 2014 My router is a T-gateway ( from telstra) that i setup a few days ago, and it says in my settings that my nat type is already type 2. When i play call of duty ghosts it says open down the bottom right but then when i play warframe it warns me that i have a strict nat. My UPNP is enabled but i dont think it is enabled in warframe which is one of the options to choose when it tries to help me. I dont know what it means by star map? Link to comment Share on other sites More sharing options...
(PSN)aRcTiC_PhAmToM Posted February 1, 2014 Author Share Posted February 1, 2014 First post what kind of router you have, then we can try to help. To get into your router configuration screen, you need to go on a computer (or use the PS4 browser if you don't have a computer) to type in the IP address of the router. Commonly it is http://192.168.0.1 or sometimes http://192.168.1.1 Once you are in the router setting you need to look for a UPNP checkbox and check it. Also I would recommend updating your router's firmware to the latest version which can often increase speed and fix connection problems. To get the latest firmware, go to the website of whoever makes your router and search for your model number. If you did everything correctly then when you run a connection test on PS4 it should say NAT type 2 which is good. Type 2 means open NAT which is the best you can get. My router is a T-gateway ( from telstra) that i setup a few days ago, and it says in my settings that my nat type is already type 2. When i play call of duty ghosts it says open down the bottom right but then when i play warframe it warns me that i have a strict nat. My UPNP is enabled but i dont think it is enabled in warframe which is one of the options to choose when it tries to help me. I dont know what it means by star map? 0 Quote MultiQuote Delete Edit Link to comment Share on other sites More sharing options...
(PSN)beerninja88 Posted February 2, 2014 Share Posted February 2, 2014 My router is a T-gateway ( from telstra) that i setup a few days ago, and it says in my settings that my nat type is already type 2. When i play call of duty ghosts it says open down the bottom right but then when i play warframe it warns me that i have a strict nat. My UPNP is enabled but i dont think it is enabled in warframe which is one of the options to choose when it tries to help me. I dont know what it means by star map? what is the model number Link to comment Share on other sites More sharing options...
(PSN)aRcTiC_PhAmToM Posted February 2, 2014 Author Share Posted February 2, 2014 what is the model number The serial number is CP1324TA04L and another code thats on the box is ADSL TG797. not sure if any of them are model numbers Link to comment Share on other sites More sharing options...
(PSN)aRcTiC_PhAmToM Posted February 2, 2014 Author Share Posted February 2, 2014 what is the model number And also i sent in a request for help on this warframe website and this is what i am awaiting a reply from. they have already contacted me but this was my latest question. I figured out how to add Warframe to my applications that i let through my firewall but i dont know some of the information i need to fill in.It says all these options here but i dont know what to type in. Under the option 'protocol it lets you choose UDP, TCP or any. Same options are given under Trigger protocol. The others dont have options. Protocol Port Range Translate To ... Trigger Protocol Trigger Port to Link to comment Share on other sites More sharing options...
(PSN)beerninja88 Posted February 3, 2014 Share Posted February 3, 2014 It sounds like your gateway/router combo either does not have uPNP enabled or the uPNP is not working properly. To get around this, you can foward ports manually (which is what universal plug 'n play is supposed to do for you on the fly). follow the directions here http://portforward.com/english/routers/port_forwarding/Thomson-Alcatel/TG797/PS4.htm Before port forwarding, save your PS4 in your router settings as a static DHCP address so it recognizes it every time. If your router doesn't support static DHCP then you will have to assign an IP address manually in the PS4 setup menu which is a pain in the &#!. post here if it works Link to comment Share on other sites More sharing options...
(PSN)joao999 Posted February 5, 2014 Share Posted February 5, 2014 https://forums.warframe.com/index.php?/topic/172452-strict-nat-and-failed-to-join-session-solved/ Link to comment Share on other sites More sharing options...
(PSN)knumbknuts Posted March 1, 2014 Share Posted March 1, 2014 (edited) I've got the same problem, been trying to fix it for a couple hours now keep trying different alleged port forward configurations still get the same strict nat message.If anyone could tell me what i've done wrong i'd appreciate it so much, hard to enjoy the game solo when your friends want to play. http://imgur.com/ne0g2yJ Edited March 1, 2014 by (PS4)knumbknuts Link to comment Share on other sites More sharing options...
(PSN)aRcTiC_PhAmToM Posted March 3, 2014 Author Share Posted March 3, 2014 I've got the same problem, been trying to fix it for a couple hours now keep trying different alleged port forward configurations still get the same strict nat message.If anyone could tell me what i've done wrong i'd appreciate it so much, hard to enjoy the game solo when your friends want to play. http://imgur.com/ne0g2yJ same its so boring by yourself, i have tried to fix it but it still wont. How do we forward our ports to the ones it says when it tell us we have strict nat Link to comment Share on other sites More sharing options...
(PSN)aRcTiC_PhAmToM Posted March 3, 2014 Author Share Posted March 3, 2014 It sounds like your gateway/router combo either does not have uPNP enabled or the uPNP is not working properly. To get around this, you can foward ports manually (which is what universal plug 'n play is supposed to do for you on the fly). follow the directions here http://portforward.com/english/routers/port_forwarding/Thomson-Alcatel/TG797/PS4.htm Before port forwarding, save your PS4 in your router settings as a static DHCP address so it recognizes it every time. If your router doesn't support static DHCP then you will have to assign an IP address manually in the PS4 setup menu which is a pain in the &#!. post here if it works i dont think it works i have tried to do that but its hard when i dont know exactly how to do what you said :( Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now