alexmach1 1,058 Posted November 2, 2015 Share Posted November 2, 2015 I noticed that some of the example files use smoothing groups in lieu of sharp normals. Does this mean we are allowed to do the same(in moderation) or are these special cases? Link to post Share on other sites
Consona 83 Posted November 2, 2015 Share Posted November 2, 2015 1) Not sure what you mean here. If it's just 'how the bow's strings are made' it's just an only emis texture with a panning alpha. We vary the brightness and the speed of the pan as the string is pulled etc. That you could do, but sure if it is what you are looking for though. 2) Yes. Polys facing in both directions that are co-planar works fine. The example Syandana is setup that way IIRC. 1. Thank you, but what kind of geo this textures applied to, what does it made of? Is it shaped by deformers or bonemodified polygons? Well, what way should I move to get solid, not animated, strings that looks like strings on bow? Give me an advice, if you please. 2. I feel so dumb that I forgot to explore example files just before asking stupid questions -_-. Thank you, Kary. Link to post Share on other sites
Issun135 1,446 Posted November 3, 2015 Share Posted November 3, 2015 I should have put this post here but oh well. a quick copy paste: For those of us making Syandanas, do you want us to combine all the meshes in to one object or leave it be. For example the syandana I'm currently working on has 6 separate objects. Should I leave it be or should I compile them together for fewer texture files? Link to my progress thread for connivence: https://forums.warfr...ndana-workshop/ Link to post Share on other sites
satsujinki01 130 Posted November 4, 2015 Share Posted November 4, 2015 I have a question: How do I paint emblem/patterns on my Amprex? Because I used it for GIMP to make my own creativity, like, flowers, paws or something else. Link to post Share on other sites
[DE]Kary 2,875 Posted November 4, 2015 Share Posted November 4, 2015 1. Thank you, but what kind of geo this textures applied to, what does it made of? Is it shaped by deformers or bonemodified polygons? Well, what way should I move to get solid, not animated, strings that looks like strings on bow? Give me an advice, if you please. 2. I feel so dumb that I forgot to explore example files just before asking stupid questions -_-. Thank you, Kary. Ah the strings on the bows are modified by bones -- we are not looking for that kind of content at this point as it gets very complex to communicate the intention to rigging and those guys are very busy already. If you want the glowing look of a bow string and just have it move due to the cloth simulation that is fine. I should have put this post here but oh well. a quick copy paste: For those of us making Syandanas, do you want us to combine all the meshes in to one object or leave it be. For example the syandana I'm currently working on has 6 separate objects. Should I leave it be or should I compile them together for fewer texture files? Link to my progress thread for connivence: https://forums.warfr...ndana-workshop/ All textures for a Syandana have to be in one 1024x1024 map. You can keep elements as separately named objects if you want -- Syandanas will have to go through a moderately complex setup by us to work in game. I have a question: How do I paint emblem/patterns on my Amprex? Because I used it for GIMP to make my own creativity, like, flowers, paws or something else. You'll have to look at our texturing guide and see how to apply that w/ GIMP -- I'm not familiar with it. Link to post Share on other sites
Necr0Ra1se 1,099 Posted November 4, 2015 Share Posted November 4, 2015 Hello is there posible to make asymmetrical skins? For example different pattern on left and right legs? Link to post Share on other sites
(PSN)Chaos-Design 0 Posted November 4, 2015 Share Posted November 4, 2015 Ok so one error to the next come on ... Error 15: SteamAPI CreateItem Failed! just let me upload already.. Link to post Share on other sites
[DE]SizzlingCalamari 51 Posted November 4, 2015 Share Posted November 4, 2015 Ok so one error to the next come on ... Error 15: SteamAPI CreateItem Failed! just let me upload already.. Error 15 means access denied. Could you PM me your Steam profile page so we can look into this? DESizzlingCalamari Link to post Share on other sites
loo10ant 9 Posted November 4, 2015 Share Posted November 4, 2015 Not sure if this is the correct place to ask this, but any time i load any of my own Weapon .obj's into Tennogen it just doesn't load them in at all, in fact it shows no sign of anything happening. Loading the Polycount obj's works fine. I modelled my models in Blender and exported them, then i also tried using 3ds Max to export using the Export Setting shown on the TennoGen, i also Deleted any Illegal Polys. Can anyone help? Link to post Share on other sites
Stevelol 33 Posted November 4, 2015 Share Posted November 4, 2015 So i have seen the date being thrown around, 6th of November for submissions for the first round? Can someone from DE Please clarify the first date things will be looked at please ? I am unable to find any dates anywhere. Link to post Share on other sites
OniDax 13,271 Posted November 4, 2015 Share Posted November 4, 2015 So i have seen the date being thrown around, 6th of November for submissions for the first round? Can someone from DE Please clarify the first date things will be looked at please ? I am unable to find any dates anywhere. Yeah, DE said they'll decide on the first round on the 6th. They said it in the devstream, I think. Link to post Share on other sites
theRCB 333 Posted November 4, 2015 Share Posted November 4, 2015 SO question. If I had already filled out the payment acceptance stuff for steam workshop... how do I change that information? Because someone had stolen my credit card, so I needed to get a new one, so now I have to put in new information about it, which I can't seem to figure out how to do. Link to post Share on other sites
[DE]SizzlingCalamari 51 Posted November 4, 2015 Share Posted November 4, 2015 SO question. If I had already filled out the payment acceptance stuff for steam workshop... how do I change that information? Because someone had stolen my credit card, so I needed to get a new one, so now I have to put in new information about it, which I can't seem to figure out how to do. You'll need to contact Steam Support to resolve this issue. https://support.steampowered.com/ Link to post Share on other sites
alexmach1 1,058 Posted November 4, 2015 Share Posted November 4, 2015 How many smoothing groups are we allowed to have? Link to post Share on other sites
[DE]Kary 2,875 Posted November 5, 2015 Share Posted November 5, 2015 How many smoothing groups are we allowed to have? No set number. Ideally the same as the number of UV islands you have. Link to post Share on other sites
Zahnny 6,534 Posted November 5, 2015 Share Posted November 5, 2015 Will Accessories and Sentinel Accessories be made so players can sculpt and model them? Also Sugatras. Gotta love me those Sugatras. Link to post Share on other sites
_malaya_ 727 Posted November 8, 2015 Share Posted November 8, 2015 (edited) All textures for a Syandana have to be in one 1024x1024 map. You can keep elements as separately named objects if you want -- Syandanas will have to go through a moderately complex setup by us to work in game. You'll have to look at our texturing guide and see how to apply that w/ GIMP -- I'm not familiar with it. Are we allowed to have 1x2 textures? My Syandana submission has a separate set of 1024x512 textures for the wings and the base for the panning emission, but now I'm wondering if I should rebake the textures to a square one Edited November 8, 2015 by MaaYuu Link to post Share on other sites
OniDax 13,271 Posted November 8, 2015 Share Posted November 8, 2015 Are we allowed to have 1x2 textures? My Syandana submission has a separate set of 1024x512 textures for the wings and the base for the panning emission, but now I'm wondering if I should rebake the textures to a square one your answer is literally at the top of this page... "one 1024x1024 map", so not only do you need to have a 1024x2024 map (so, that'd mean no 1x2 textures), but you need one texture for all your various parts (so, no separate set of textures). Link to post Share on other sites
_malaya_ 727 Posted November 9, 2015 Share Posted November 9, 2015 (edited) Welp, glad I made two 1x2s instead of two 1x1s.would have been a bigger pain in the bum to combine the two Edited November 9, 2015 by MaaYuu Link to post Share on other sites
Larsurus 2,227 Posted November 9, 2015 Share Posted November 9, 2015 Question: I get gray/ugly outlines on my alpha tint/shiny metal parts. Any clue what is the cause of this? Link to post Share on other sites
Drone_Dankovsky 99 Posted November 18, 2015 Share Posted November 18, 2015 Not sure if this is the correct place to ask this, but any time i load any of my own Weapon .obj's into Tennogen it just doesn't load them in at all, in fact it shows no sign of anything happening. Loading the Polycount obj's works fine. I modelled my models in Blender and exported them, then i also tried using 3ds Max to export using the Export Setting shown on the TennoGen, i also Deleted any Illegal Polys. Can anyone help? I have the same problem. Did you find out? Link to post Share on other sites
OniDax 13,271 Posted November 18, 2015 Share Posted November 18, 2015 Have you made materials for your obj files? You gotta make a material for them before it shows up. Link to post Share on other sites
Drone_Dankovsky 99 Posted November 18, 2015 Share Posted November 18, 2015 Have you made materials for your obj files? You gotta make a material for them before it shows up. Hmm... I totally forgot about that. I'll try it soon. Thank you for advise! Link to post Share on other sites
LuckyCharm 3,638 Posted November 19, 2015 Share Posted November 19, 2015 Hey, I seem to be having a little problem, I have my model in tennogen, it looks fine, I add a diffuse map, still looks fine, but add any other maps other than emissive.. and the entire blade of my weapon just fully blacks out. Normal map, spec, roughness, all make it black. It even randomly bleeds out and colors part of the emissives black too. In substance painter it looks fine, it's not super reflective or anything so its not just a metal issue, and changing the lighting does nothing to the black parts, just whites out the rest. Any ideas how to fix this? Ive tried each of those maps on their own and they make it black own their own too so its not just the one map Link to post Share on other sites
MetalNovaZ 29 Posted November 21, 2015 Share Posted November 21, 2015 (edited) Will I be able to actually send a Kronen.obj skin to the workshop since they say it's currently restricted to those weapons? Will my kronen skin be reviewed as well? EDIT : I Managed to get hold of a good number of weapon.obj files through source coding am i allowed to use them in the steam workshop and will they be reviewed? Edited November 21, 2015 by MetalNovaZ Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now