Help With Excalibur Rj Build

[LoneRanger999]

Hello guys!!

So it's been a few months since i started this game and i wanted to build a RJ excalibur so that i can spam it continuously with decent damage... so i tried this build... want to know if i can improve anything on this....Thanks in advance

 

 

http://prntscr.com/9o8bxl

 

[p3z1]

Pretty old screenshot right there...

 

Max fleeting, switch that streamline to get flat 175% efficiency, no more excess efficiency

Overextended at your own volition

Swap out vigor for Blind rage (compensate with appropriate efficiency if you have this)

Primed flow, if you have it

Get corrosive projection over energy siphon IMO

[GordoFreeman]

Hi, you can use this site to test your builds (if you dont know about it yet): http://warframe-builder.com/

First things first; you want an all around build (regular missions) or the infamous draco spammy one?

You can improve your build (without too much sacrifice or forma) maxing transient, if you want to forma and go into the spammy territory you can replace the D polarity and use a rank 2 blind rage, that will be countered by the extra eff you have (eff is capped at 75%, more than that is useless). You can also change flow for the blind rage and keep the D and the vigor at the expense of the extra energy, that you can replenish using plates or with energy orbs (and a helpful carrier sentinel)

 

PD: the infamous draco spammy can use some extra forma and one more corrupted mod (overextended) and you can also use (by unlocking it with an exilus adapter) the extra utility slot and one of the new drift mods (post 2nd dream quest farming or trade for it), but thats only if you want to go further into that thing

Edited January 10, 2016 by GordoFreeman

[darkwhip11]

Its always nice to see a fellow tenno getting back into the fight.

Im sure my buddy p3 will be able to help you out,

 

Btw p3 i still havent gotten your friend request.

[NN13]

If you are asking for a Draco RJ Excal build, this is what I use -

 

 

If I have a Roar Rhino,I use this build.

If I don't have a Roar Rhino or any buffer, I replace Primed Flow with Intensify.

[LoneRanger999]

Thank you guys!!!!

So i was just thinking.. using overextended decreased my power strength which i don't want..... and  GordoFreeman i want to spam RJ like hell....

so i did this build see if it's valid... though im concerned about the health and shields.... cuz i tend to die easily...

 http://warframe-builder.com/Warframes/Builder/Excalibur/t_30_0020020320_3-8-5-4-4-5-5-3-5-6-1-5-12-5-5-55-0-5-256-6-3-411-2-10-481-7-10-612-9-4_55-11-6-11-411-8-5-9-4-9-12-6-256-9-481-7-3-18-612-8_0/en/1-0-5/82907/0

[TheSteelRat]

everything withen 40m is going to be dead b/c of RJ.  Dont worry about armor/shields/health.  If you are concnered, bring a frost with Freezing force to buff you.

 

But I use CP, with Power Drift.  I didn't think steel charge helped.

[LoneRanger999]

kkinnison i used steel charge to get more points to equip mods as a V forma steel charge aura gives me 18 points to spend..... so for corrosive projection i need to change the polarities... and could you suggest me a good drift mod which goes well with this build?? i thought of using coaction drift as it gives more power to my aura which is CP now... so more armor reduction..... is this good or is there a better drift mod for this build??

http://warframe-builder.com/Warframes/Builder/Excalibur/t_30_0220020330_4-4-5-5-3-5-6-1-5-12-5-5-34-8-5-55-0-5-256-6-3-411-2-10-481-7-10-612-9-4_55-11-6-6-411-8-5-9-4-9-12-6-256-9-481-7-34-14-612-8_0/en/1-0-5/0