Jump to content

Grid For Dojo Decoration Placement


Icymountain
 Share

Recommended Posts

Give the Dojo a grid during decoration placement. It would really help loads when placing down decorations, for example, at the exact centre of the room, or perhaps at a certain angle/point away from another decoration. In case of inconvenience, make another button to toggle decorations snapping to grid or not. Good idea, no? 

Link to comment
Share on other sites

Fully agree with this.

 

I am one of those people who gets irked by things being a little off center or tilted a little.

 

I like symmetry and things dead center.

 

A shortcut key to allow decorations to snap to the grid will be great so I can rotate the decoration precisely 45 degrees.

Also a duplicate function so I can say copy the previous banner size.

Link to comment
Share on other sites

My clan warlord placed some storage crates near the elevator, and my ocd is going crazy becouse they aren't standing pefecty straight.

 

what's "ocd" ?

 

btw.

I disagree with suggestion, I had no problem perfectly decorating our dojo

Edited by Strac_CRO
Link to comment
Share on other sites

what's "ocd" ?

 

btw.

I disagree with suggestion, I had no problem perfectly decorating our dojo

ocd is Obsessive Compulsive Disorder. Everyone has it, its just how minor or how major. Its hard to explain

 

You had no problem, good for you then. Unfortunately not everyone's like you. Besides, whats wrong with such a system? If you had read properly, you would have seen that I suggested a key that toggles the 'grid mode', so that it wouldn't bother those who didn't need such a function. 

 

And I'd love to see other 'snap' functions for things like rotation and size. ALso, perhaps a small display over the object being placed that shows angle, percentage size, and coordinates in current room's grid. 

 

Also, perhaps an 'Edit' mode for the room would be nice. Go to the console once to enter edit mode, back again to exit it, instead of the current inefficient way of going back and forth and again and again to edit multiple decorations. 

 

In edit mode, the decoration menu can be accessed with a single button. Also, mousing over a decoration displays its stats like angle, percentage size and coordinates in room. Coordinates are measured from the decoration's center, allows for easy lining up of other decorations with it. Selecting a decoration then allows you to move/destroy it. While moving a decoration, the decoration shows its angle, size and coordinates, and the decoration menu key brings up the grid mode, forming a grid over the entire room and making the decoration snap to grid/angle/size. 

 

Non-architects can still easily donate by going over to the hologram of the object and using it with x. Also, like rooms, the hologram of the objects display its % completion of its material requirements/construction. 

Edited by Icymountain
Link to comment
Share on other sites

Give the Dojo a grid during decoration placement. It would really help loads when placing down decorations, for example, at the exact centre of the room, or perhaps at a certain angle/point away from another decoration. In case of inconvenience, make another button to toggle decorations snapping to grid or not. Good idea, no? 

I love this! I came here to make a thread about this very issue. The grid would be SO appreciated or at least not have you work with the same "over the shoulder" camera angle. Makes it very difficult to place decorations symmetrically.

Link to comment
Share on other sites

  • 2 weeks later...

I noticed that the notification changed when placing decorations - now there is an added part:

hold "" to snap

 

Now, the problem is I have no idea whatsoever what I'm supposed to hold :) I mean it's only "" so... I mean if it was " then it would be only one " yet it has two meaning the actual control should be named within these little guys (like " something ")... tried all my buttons (I believe) to no avail. Any luck for someone else?

Link to comment
Share on other sites

I noticed that the notification changed when placing decorations - now there is an added part:

hold "" to snap

 

Now, the problem is I have no idea whatsoever what I'm supposed to hold :) I mean it's only "" so... I mean if it was " then it would be only one " yet it has two meaning the actual control should be named within these little guys (like " something ")... tried all my buttons (I believe) to no avail. Any luck for someone else?

 

I belive that grid-snapping is being tested, but text string responsible for this option somehow got to general public.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...