The Parallax landing craft has a busted model when it is used in in-game rendered cut-scenes. So when it pulls into a relay, also when it is docked at the relay, or when it pulls away from a mission where you can see the back of the craft, there are floating, misplaced portions of the model near the back thruster. These parts are "misplaced" because you can see where they go when the Parallax is docked. As far as I can tell, every landing craft has the cylinder hatch for your warframe. And above that hatch is four (4) structures that resemble locking clips of some kind, all placed in a fanned out position above the cylinder hatch. On the Parallax, they are missing, and dark dents mark where they should be. Right now, they are floating just behind the main thruster.
Now that you know, it should not take much to put them back in their intended place.
As a side note, the thighs on Octavia Prime look very odd as they are currently, with the "speakers" placed as they are. As she is now, she resembles someone who needs crutches to walk around, or never even heard of "leg day". I understand the leg model is the same one as the regular Octavia version, and only the mandacord parts were changed. But that gap is normally filled in by the mandacord, so Octavia just has an interesting, inorganic shape. But Octavia Prime's thighs look just sad once you truly see that gap. So as a look suggestion, maybe, since her thighs are already the same as the regular variant, maybe take the part that sockets into that gap from the regular variant, and integrate it into the prime mandacord. And since you loose all the rotating glowing, perfect circular track curves on the regular version, adding in the more flowing ribbon prime tracks starting from the front of the thigh, where the gap would be filled in,(or in the center of the mandacord between the metal, and speakers) and attach the end of it to a spot in the back, where the gap would be filled in, it would add a bit of cohesiveness in the design, both as an overall look, and as a progression from regular to prime. Otherwise, running a track ribbon from the top-back of the thigh mandacord to the bottom. Similar to the shape of a 7, but curved, or the outer edge of a human ear. It would require two ports to be added to the current mandacord design, since the design seems to indicate that the ribbons only attach to the shiny metal parts. But I think the second design, though needing more work, would look better, since it would not intersect with most thigh holstered secondary weapons. Even if all that is changed is the gaps being more filled in to look more complete, or reinforced, I would be happy. Otherwise, I will try not to look at it. Or maybe break down, and use the regular version's skin instead of the prime skin.
I hope this helped, and possibly gave some ideas. If ever you want more design ideas, I have a ton to share, and could show, since I am pretty decent at drawing. Good luck fixing the Parallax. :)
