Jump to content

Image Fold (Screen Tearing) since new Engine Release.


CuChulainnWD

Recommended Posts

Since the new update with the graphics engine, I have been getting a folded image, where the top and bottom of the divide line is skewed or folded over from one another. It occurs when in motion, or panning the camera back and forth. It starts at the top of the screen and progresses down as I pan the camera back and forth.

I have motion blur set to off, it occurs now in either Classic or Beta Engine mode. I have adjusted various settings, and no dice.

OS Name    Microsoft Windows 10 Home
Version    10.0.18362 Build 18362
Other OS Description     Not Available
OS Manufacturer    Microsoft Corporation
System Name  
System Manufacturer    ASUSTeK COMPUTER INC.
System Model    G10AC
System Type    x64-based PC
System SKU    All
Processor    Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, 3401 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date    American Megatrends Inc. 1101, 06/12/13

Display setting in game is Full Screen Windowed mode.
SMBIOS Version    2.7
Embedded Controller Version    255.255
BIOS Mode    UEFI
BaseBoard Manufacturer    ASUSTeK COMPUTER INC.
BaseBoard Product    G10AC
BaseBoard Version    Rev X.0x
Platform Role    Desktop
Secure Boot State    On
PCR7 Configuration    Binding Not Possible
Windows Directory    C:\WINDOWS
System Directory    C:\WINDOWS\system32
Boot Device    \Device\HarddiskVolume2
Locale    Canada
Hardware Abstraction Layer    Version = "10.0.18362.752"
User Name   
Time Zone    Eastern Daylight Time
Installed Physical Memory (RAM)    32.0 GB
Total Physical Memory    31.9 GB
Available Physical Memory    20.0 GB
Total Virtual Memory    65.9 GB
Available Virtual Memory    45.2 GB
Page File Space    34.0 GB
Page File    D:\pagefile.sys
Kernel DMA Protection    Off
Virtualization-based security    Not enabled
Device Encryption Support    Reasons for failed automatic device encryption: TPM is not usable, PCR7 binding is not supported, Hardware Security Test Interface failed and device is not Modern Standby, Un-allowed DMA capable bus/device(s) detected, TPM is not usable
Hyper-V - VM Monitor Mode Extensions    Yes
Hyper-V - Second Level Address Translation Extensions    Yes
Hyper-V - Virtualization Enabled in Firmware    No
Hyper-V - Data Execution Protection    Yes

Graphics card is a GeForce GTX 1060 6GB. 

Monitor: ASUS MG28UQ Gaming Monitor - 28" 4K UHD

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...