bag after patch

[shadow73]

Today faced a problem after the last patch that textures began to vanish in the majority of missions or wrong to be displayed. Never problems with the videocard was, drivers stand the last assembly, I think it because of a patch in what something changed in the physX settings. Problems of the following type: 1) Earth becomes sometimes transparent. 2) There are wrong textures, strips on the screen.

And still sometimes there is a bug in which when loading mission the character isn't displayed and nobody sees it and in which nobody aims. It is affected by only mass effects.

My computer:

Operating System: Windows 8

Processor: AMD Athlon™ X4 620 Processor (4 CPUs), ~2.6GHz

Memory: 4096MB RAM

Available OS Memory: 4094MB RAM

Page File: 3020MB used, 2417MB available

DirectX Version: DirectX 11

User DPI Setting: Using System DPI

System DPI Setting: 96 DPI (100 percent)

DWM DPI Scaling: Disabled

DxDiag Version: 6.02.9200.16384 64bit Unicode

Display Devices

---------------

Card name: ATI Radeon HD 4800 Series

Manufacturer: Advanced Micro Devices, Inc.

Chip type: ATI display adapter (0x9440)

DAC type: Internal DAC(400MHz)

Device Type: Full Device

Device Key: Enum\PCI\VEN_1002&DEV_9440&SUBSYS_114A174B&REV_00

Display Memory: 2808 MB

Dedicated Memory: 1017 MB

Shared Memory: 1791 MB

Current Mode: 1600 x 900 (32 bit) (60Hz)

Monitor Name: SyncMaster P2050(G)/P20500(G),Magic P2050G(Analog)

Monitor Model: SyncMaster

Monitor Id: SAM0521

Native Mode: 1600 x 900(p) (60.000Hz)

Output Type: HD15

Driver Name: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll

Driver File Version: 8.17.0010.1129 (English)

Driver Version: 8.970.100.3000

DDI Version: 10.1

Feature Levels: 10.1,10.0

Driver Model: WDDM 1.1

Graphics Preemption: DMA

Compute Preemption: DMA

Driver Attributes: Final Retail

Driver Date/Size: 7/4/2012 10:25:14, 1081856 bytes

WHQL Logo'd: No

WHQL Date Stamp: None

D3D9 Overlay: Not Supported

DXVA-HD: Not Supported

DDraw Status: Enabled

D3D Status: Enabled

AGP Status: Enabled

[Ced23Ric]

This forum cannot help you, per se. Try contacting Warframe Support about the issue.

Also, try deactivating Direct X 11 in the launcher.

[shadow73]

Thnx, but before the last patch texture were displayed normally, that my videocard is more white has full support of directx 11

[Ced23Ric]

Have you tried turning Direct X 11 off? Because there is an issue, currently, with Direct X 11 support.