-QUILL_PETER- Posted February 21, 2018 Share Posted February 21, 2018 Before 22.13.3 Convectrix could be continuously fired in a spread by holding down Fire, letting go and letting it fan back out, holding Fire, etc, etc. It now stops firing altogether once you release Fire instead of just fanning the beams back out. Please tell me this is a bug and not just an ignorant design change. Link to comment Share on other sites More sharing options...
GreatEsse Posted February 21, 2018 Share Posted February 21, 2018 Second this, the beams just stop firing and reset to their original spread instantaneously instead of slowly spreading out like they used to this completely ruins the fun in this weapon Link to comment Share on other sites More sharing options...
xBelgabor Posted February 22, 2018 Share Posted February 22, 2018 Is the alt fire not working for want you want to achieve? Link to comment Share on other sites More sharing options...
-QUILL_PETER- Posted February 22, 2018 Author Share Posted February 22, 2018 40 minutes ago, xBelgabor said: Is the alt fire not working for want you want to achieve? It's not about the alt-fire, they both could do the same thing in different directions. Prior to the Hotfix, the Convectrix would keep firing its beams while it reset to its original width, and you could utilize this by holding down fire before that happened. You could keep fanning the beams in and out and in and out until the clip ran out. Now, for whatever reason, by flaw or design, once you let go of the trigger, the beams immediately stop firing. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now