Jump to content
Dante Unbound: Share Bug Reports and Feedback Here! ×

Plains of Eidolon: Hotfix 22.0.1


[DE]Megan
 Share

Recommended Posts

7 hours ago, Monolake said:

Plains always crash on load "out of memory" in EE.log ( I have 4gb win7 32 bit)

Defrag, shut down all services that you can. Close all apps you can. PoE system requirements are around 6GB of RAM, but I did manage to load a solo version after a defrag on 4GB. It was also 9-15fps during the good parts, and RAM increase of about 400MB switching from Night to Day. I've also turned off things like Spooler, Superfetch, etc. I even managed to shut down the "Store" service in windows 8.1! Here's a guide for services: http://www.blackviper.com/service-configurations/black-vipers-windows-8-service-configurations/

The defrag is the MOST critical part of this, the patch took a folder with 2 total fragments (the 15gb cache file) and gave me over 6000 file fragments. 

Link to comment
Share on other sites

10 minutes ago, FarfarsGamlaKalsonger said:

I don't get it, I don't have the best computer but i can play warframe on medium without a single problem everytime i walk to the gate it loads forever then it crashes and i get a hardware failure from warframes webbsite. And there is nothing to help in the support section. So what is up with that?

Defrag. PoE takes about 700-1000 more MB of RAM than normal missions.

Link to comment
Share on other sites

 

7 hours ago, Monolake said:

Plains always crash on load "out of memory" in EE.log ( I have 4gb win7 32 bit)

On a 32-bit Windows you only have 2GB available to any application, regardless of how much physical RAM you have. If this game is leaking or e.g. your video driver is using your user mode memory pool (the allotted 2GB) you will get into troubles. You could try lower graphics settings or google for /3GB or bcdedit's IncreaseUserVa and provision up to 3GB of memory to user mode applications. But this latter solution oftentimes causes Windows to become unstable (drivers are typically the culprit) and it would require Warframe to be built with /LARGEADDRESSAWARE (which may very well not be the case).

Link to comment
Share on other sites

8 hours ago, Rekalty said:

Please fix Drone getting stuck/not moving at all while escorting it, had two missions so far where the drone would just stop moving, Lotus telling me that another wave is attacking it, over and over and over, spawning more and more enemies, but drone is doing jack all to move towards the extract. Spend a good 5 minutes defending it before I just  jumped off a cliff, still hearing Lotus yelling at me about another wave spawning. And another one. And another one. And another one. And another one. And another one. And another one. And another one. And another one. And another one. And another one. But I digress.

Don't bother trying to fix the drone. Just remove it. Like all escort missions, it is absolutely horrible and anti-fun in every way.

  • Like 1
Link to comment
Share on other sites

I have a big issue whereby i can't even enter the game. The "login failed.Check your info" pops up every time i try to log in, even though i know that my password was correct, as i managed to enter the Warframe website with the same password. 

P.S Im still trying to get in after 10 hours of failed attempts.

Edited by BlueKethamine
Link to comment
Share on other sites

Found a problem. While you at Plains and almost you finish your mission the randomly crashes. " example when you had 24/25 kills and you kill the last one it crashing ". Is there any chance to fix it ? " HP Pavilion laptop I3 Processor / 2 gb Nvidia Geforce video card , 8 GB DDR4 ram. Thats my config " Using almost every graphics settings to max.

Link to comment
Share on other sites

10 hours ago, BlueKethamine said:

I have a big issue whereby i can't even enter the game. The "login failed.Check your info" pops up every time i try to log in, even though i know that my password was correct, as i managed to enter the Warframe website with the same password. 

Same exactly problem here .. hope DE. will Fix this i only want to enter the game

  • Like 1
Link to comment
Share on other sites

1 hour ago, RorschachRev said:

Defrag. PoE takes about 700-1000 more MB of RAM than normal missions.

well im going in deeper in the computer, i think it is something to do with priority list becouse i opened the task menger and it was like cpu 98%, gpu 12% so it is something at a miss there. well i became frustrated and then i went and got my coffee so i think that may be the problem. im useing windows 10 and i have not had any problem so far with it so i may be the game.

Link to comment
Share on other sites

Привет, не могу войти в свой аккаунт! Говорит "не удалось войти в систему. Пожалуйста, проверьте ваши данные", но на сайте могу войти!!! Может потому что Стим версия? Пожалуйста, помогите.

 

Edited by DeadlyJester1121
Link to comment
Share on other sites

Hey, just a head's up. This one friend of mine told me that for him, the lith relics are broken. he equipped eight, collected 10 reactant each time, and not only did he never get anything from the relics, but he also never saw even the void stuff used to refine his relics. (Sorry for being a bit foggy with my naming of things... its pretty early where I am still...)

Link to comment
Share on other sites

27 minutes ago, RorschachRev said:

Defrag, shut down all services that you can. Close all apps you can. PoE system requirements are around 6GB of RAM, but I did manage to load a solo version after a defrag on 4GB. It was also 9-15fps during the good parts, and RAM increase of about 400MB switching from Night to Day. I've also turned off things like Spooler, Superfetch, etc. I even managed to shut down the "Store" service in windows 8.1! Here's a guide for services: http://www.blackviper.com/service-configurations/black-vipers-windows-8-service-configurations/

The defrag is the MOST critical part of this, the patch took a folder with 2 total fragments (the 15gb cache file) and gave me over 6000 file fragments. 

So you've managed to run it on 32bit system? good to know, Ill try defragging and setting swap file to higher value

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...