Investor_Sarif Posted October 15, 2018 Share Posted October 15, 2018 i've posted this elsewhere since i didn't initially see this thread - but with the new elemental effects,i've noticed something strange that i believe may be a bug. in short; the effects seem to apply incorrectly on weapon skins that change the model,lacking the color changes that follow normally and even using different effects for the same elemental setup for example,the standard ohma with corrosive,and purple energy Spoiler the same coloring,but with the other skins Spoiler again,but with the kesheg and a red magnetic coloring Spoiler and again,with the skins on it Spoiler note that with the towsun skin,the effects are just fine - and i've looked at a couple other skins with a simular effect - Ack and Brunt's nightwatch skin is normal while the fragor's brokk skin doesn't apply them correctly. broken war has them perfectly fine but if you change it's skin,the elemental effects refuse to apply correctly - so on... Link to comment Share on other sites More sharing options...
BlindObserver Posted October 15, 2018 Share Posted October 15, 2018 I've discovered a few random, small things. None of them show stoppers by any means but still issues. Saryn's Molt ability leaves behind a model that is standing in a t-pose instead of mimicking whatever animations were active during casting. I've been able to replicate this one on multiple missions. Visiting players are unable to trigger doors opening/enter either the Personal Quarters or Transference Room when in another player's Orbiter. Tested both as the host and the visitor. Unless I'm just an idiot the Text Decor spoken of in the patch notes doesn't appear to exist in the game? An older issue I've noticed, but while we're here talking about bugs during Invasion missions Grineer/Corpus crates are displaying on the wrong tilesets. Grineer crates on the Corpus tiles of the mission and vice versa. Same for Grineer and Corpus bodies. Reproduced so many times over the last few months. This Solaris United NPC added to the Cetus markets is surrounded by objects in crates that I think don't have the proper textures? These looks like placeholder textures. Also a few of these canisters are floating in mid air. Link to comment Share on other sites More sharing options...
-Bv-Salem Posted October 15, 2018 Share Posted October 15, 2018 hace 6 horas, Z1L3M dijo: Vitus illumina and judicial coils are just invisible, you buy it and get nothing. I just notice there is some issues with this suit combinations. Spoiler Spoiler Link to comment Share on other sites More sharing options...
Destroyalord7 Posted October 15, 2018 Share Posted October 15, 2018 Not logging in for me either. Error message: Login failed. Check your info. Here were my attempted troubleshooting tests: Checked login details, and Reset Password. Was not able to login after password reset. Can log in to Warframe Forums (tested by logging out, then back in after password reset) Can log in to Warframe app (Android) (tested by logging out, then back in after password reset) Hope we can get some assistance with this soon. (Majority of my post from another thread) EDIT: Please take a look a passwords and the characters that they can use. I was able to login after removing special characters from my password. Link to comment Share on other sites More sharing options...
Jojofyc Posted October 15, 2018 Share Posted October 15, 2018 On 2018-10-12 at 1:48 PM, lentkiller said: channeling doesn't work in controller. actually its L2 that is messed up. I switched R2 and L2 for channeling and it works so just L2 on melee is bugged. Link to comment Share on other sites More sharing options...
Darkuhn Posted October 15, 2018 Share Posted October 15, 2018 I noticed, that Garas Splinterstorm can Damage and Kill the Drones that are immune to all other Abilitys. That makes the new mode a literally "Walk in the Park" for Gara as her Damage has no problem in keeping up with the EHP increase over time. Link to comment Share on other sites More sharing options...
Bikafasz Posted October 15, 2018 Share Posted October 15, 2018 Hi. I've fouind a few bugs: 50% kuva flood is just simple siphon, after the first mission, i can do another "flood" whats really a kuva flood. kuva siphon/flood exterminate sometimes bugging, and there are not enough monster to kill, and complete the mission. Cant use my scanners, any1 of it. says: unarmed. there are some bug with operator on Cetus, if i do it too fast, cant see any metal, ore or rock on the planet, just after the operator form again. Link to comment Share on other sites More sharing options...
MisterArthur Posted October 15, 2018 Share Posted October 15, 2018 Just now, Bikafasz said: kuva siphon/flood exterminate sometimes bugging, and there are not enough monster to kill, and complete the mission. Been farming Khora and... All of a sudden, enemy spawn rates seem to have taken a plummet and efficiency is difficult to get to zone 8. Not sure if it's related or what, doubt it. Also, (I don't have screenshot evidence anymore, forgot to save them) but there's a Corpus door at the back of one of the snowy crash site tilesets that seem to have its bloom all the way at 1000%...? My bloom personally is 50 I feel sometimes it's too high, but with that door... Also, it wasn't just me who saw this, I got the other group members to check too. A literal day later it still happens, so it wasn't a "fault" game bootup Again, another map, Gas City long horizontal tileset. Not sure if it had magnetic augment on, but we had low gravity and the only blue orb to spawn was outside the map Link to comment Share on other sites More sharing options...
-Eltanin Posted October 15, 2018 Share Posted October 15, 2018 A few Plains of Eidolon issues I encountered yesterday evening: I queued public for the tier 2 bounty. Wondering why the enemies were so high level and why the bounty had five stages, I came back to Konzu to find that I had somehow completed the tier 4 one instead. I queued again for tier 2 (thinking I had misclicked, so I watched the active bounty carefully this time) and got put in a squad for tier 1. Giving up on public, I queued for tier 2 solo, this time I did consistently get the correct bounty. However, the middle stage was a drone hack-and-escort and on two consecutive attempts, the drone would get about halfway to its destination and just stop moving, making the bounty unable to be completed. On the first occasion, an enemy Arson Eximus knocked the drone up (after it had already been sitting still for a while) and it just stayed there suspended about 20 metres in the air until I aborted the mission. On a tangentially related note, I tweaked my controls over the weekend to make melee more accessible, binding both melee attack and quick melee to R. This works fine in normal combat but will not activate while in Archwing. This also means I couldn't get out of Archwing while on the plains. I've set up a workaround by secondary-binding both melee attack and quick melee to 1 (this does work OK in Archwing mode). Not sure if any other buttons are affected by this. Link to comment Share on other sites More sharing options...
Mitchell520 Posted October 15, 2018 Share Posted October 15, 2018 (edited) HI, i'm having a few part clipping issues with the new dojo room "Inspiration Hall" ,between itself and adjacent rooms Inspiration Hall #1 highlighted in blue and adjacent reactor highlighted in orange Spoiler Clipping is visible between Inspiration Hall#1 and the top of the adjacent reactor Spoiler Clipping is also visible between Inspiration Hall#1 and Hall#2 ,and with one of the Great halls Spoiler Edited October 15, 2018 by Mitchell520 Link to comment Share on other sites More sharing options...
Iorund Posted October 15, 2018 Share Posted October 15, 2018 Hello everyone! I encountered a rather strange bug trying to access Maroo's Bazaar where I was stuck in an infinite loading screen with what seems to be almost every relay background NPC speaking at once. Video evidence: https://youtu.be/PDJ52wX45lE Link to comment Share on other sites More sharing options...
Shadow-Spawn Posted October 15, 2018 Share Posted October 15, 2018 Today doors took more than 20 sec to open and the rooms had not finished loading in - so everytime you had to jump hoping for it to load before landing inside the unloaded rooms. This was on Venus in a daily Alert mission. Link to comment Share on other sites More sharing options...
Bace92 Posted October 15, 2018 Share Posted October 15, 2018 (edited) Nikana Prime Cant tell much about it, it seems that some Mods e.g Range (inculded Prime Range) dont work properly on the Nikana Prime. Maybe its Condition Overload too. anyone can tell the same probs? Volt Prime in Sanctuary + Onslaught Well thats weird too, i can press once the Ultimate from Volt per Stage (maybe 2 or 3 times) and then all others dont do any Damage. I tried it on Normal mission - all fine, on Sanctuary - nope not working as it should. Strange thing is even the Mobs act weird in Sanctuary well and if that happens the Volt Ultimate does not do any Damage. Edited October 15, 2018 by Bace92 Link to comment Share on other sites More sharing options...
morningstar999 Posted October 15, 2018 Share Posted October 15, 2018 Link to comment Share on other sites More sharing options...
OmniStef94 Posted October 15, 2018 Share Posted October 15, 2018 Cold Elemental Ward does not seem to be reflecting shots back on the attackers anymore. Link to comment Share on other sites More sharing options...
Kalle_E Posted October 15, 2018 Share Posted October 15, 2018 (edited) 44 minutes ago, Drapnek said: Paracesis suffering damage loss when using Primed Pressure Point, Blood Rush and Gradiator Might at the same time. And its 30 rank shows up like 30, not like "MAX". @Drapnek The paracesis not showing as MAX is working as intended. It's max rank is not 30. Forma for more rank Edited October 15, 2018 by Kalle_E correcting myself Link to comment Share on other sites More sharing options...
Rotteeth Posted October 15, 2018 Share Posted October 15, 2018 Enemies in Archwing missions don’t change facing. You can fly behind them and they do not turn to face you. Enemies in void missions, particularly the infested ship sometimes get stuck in the “shake” animation. Mia’s seem particularly susceptible. They do not fight back or attack. The same is also true for the juggernaut of it spawns. It just shakes and never charges. This actually makes it a pain to kill due to the fact none of its weak spots are accessible. The lighting seems off on the Sinai map. The sun tends to wash everything out. Npcs also get stuck where they never did before. From the defense point looking back towards the elevator, larger npcs get stuck on the side of the leftmost lowest staircase. Also a npc will occasionally spawn in the side rooms of the hallway between the elevator and the objective and just stand there. Forcing you to go there and kill it. The rightmost room (facing the elevator) On the lowest tier planes missions there are issues with cave based missions. The find the supply caches version has objective text that looks like a file path. The objective locations in the cave seem poorly randomized (if at all). Finally completeness this stage gives a reward but shortly there after the lotus tells you she’ll let konuz know we can’t complete the bounty. If I had to guess I would assume it’s because it thinks you’ve left the map while you’re in the caves. The kill all enemies objective in the caves has no intro voice over. You just get a map marker. Going to it expands the circle but nothing happens until you enter the cave and then the mission works as normal. This can be confusing if the cave is at an enemy camp as it is not immediately apparent what you are supposed to do. I had an exterminate void mission on Earth (Lith I believe) spawn and Lotus instantly tell me I had broken their ranks. There were no regular enemies on the map. I had to run around the end of the map and fortunately fissure enemies spawned and I could get reactants I needed. In a defense mission on Spear. I had npcs spawn in the ceiling and be unreachable. I had to abort as I couldn’t hit them with any AE attacks. Ive also noticed on many maps you can see boc shadows through the floor/ceiling. Easily reproducible on the corpus maps with elevated walkways. You can be under the walk way, look up, and see shadows for the npcs above you Link to comment Share on other sites More sharing options...
Drachnyn Posted October 15, 2018 Share Posted October 15, 2018 Paracesis is bugged as you can see in this gif: This bug doesnt seem to affect the weapon if you have 5 forma in it. Link to comment Share on other sites More sharing options...
unreal52 Posted October 15, 2018 Share Posted October 15, 2018 Paracesis does have some odd bugs atm seems like the DPS loss or mods not working right is random and affects different mods for different tenno. I found that my Buzz kill reduces my Base DPS stats, however when i change to configuration B it's fine. Kind of a strange bug. And for those that rank it to 30 and think it's maxed out, add some forma to spicen it up. Didn't encounter many other issuies in the update besides the changes to operater outfits with the bottem layer of the hoods being attached to the suit. Link to comment Share on other sites More sharing options...
BrotherAntagonist Posted October 15, 2018 Share Posted October 15, 2018 All those Paracesis issues are because it shows too much capacity, and modding over its actual capacity of rank*2 + 10 from stance deactivates mods starting from top left Link to comment Share on other sites More sharing options...
SGT_Flafnir Posted October 15, 2018 Share Posted October 15, 2018 (edited) Fish bug S, M, L, https://picload.org/view/dcdloaal/20181015134331_1.jpg.html https://picload.org/view/dcdloaow/20181015135416_1.jpg.html ---------------------------------------------- Grafik Textur Bug Before Update. https://picload.org/view/dcdloali/20180708171238_1.jpg.html After update. https://picload.org/view/dcdloaca/20181015134113_1.jpg.html --------------------------------------------- Textur Lost Cestus NPC https://picload.org/view/dcdloorr/20181015135547_1cestustexturlo.jpg.html ---------------------------------------------- Keyboard Command Y, Z, Gear wheel Bug. Synthese Scanner hotkey press Y , and Gear Wheel shows Z. Can press Y , Z , or C for manuel gear wheel option have no chance scanning lost. Gear wheel slots not locket for equipment when empty, slot overwritten. Login Error. Passwort Keyboard Command Error. me Pw is 20 Symbols long [ , 0 Y Z ] not recognized. Copy Paste NEGATIVE. Result Pw. Change. ---------------------------------------------- Kubrow Textur Bug, Grafik, Light and Brightness, low to hight not constance. ---------------------------------------------- Edited October 15, 2018 by SGT_Flafnir Picload links lost Link to comment Share on other sites More sharing options...
trunks013 Posted October 15, 2018 Share Posted October 15, 2018 Well i dont know if i'm the only one with this but each time i try to put mods on all my weapons one of them lead to a blank screen and i can't do anything ^.^ Most of the time its the weapons with the bonus of the arbritation mission ^.^ Link to comment Share on other sites More sharing options...
NeoG3nesis Posted October 15, 2018 Share Posted October 15, 2018 A couple of problems I've noticed is: 1. Volt's Discharge doesn't work in Elite Sanctuary Onslaught. It deals little to no damage, not even effecting enemies 2. The chat tabs don't work. Sometimes messages come through, but then it just stands still and no messages come or get through. At first I thought maybe people just didn't post as I looked at the clan tab, but then I moved to trading and recruiting tab where there are always posts and nothing happend: no posts appeared 3. When I exit warframe, the game is still apparently open according to steam and my taskmanager.I have to then close it through the task manager. These are just the problems I've come accross but I've heard from my friends that there are a lot more bugs. Please fix these issues as it ruins the experience of the game for me 1 Link to comment Share on other sites More sharing options...
Shadow-Spawn Posted October 15, 2018 Share Posted October 15, 2018 1hour and 20minutes to complete an Exterminate solo mission on PUCK, Uranus - due to very poor enemy spawn rate. Link to comment Share on other sites More sharing options...
mythmizz Posted October 15, 2018 Share Posted October 15, 2018 Gear wheel x synthesis scanner bug. When you press gear wheel either pressing Q or use hotkey for gear slot (1-12) to use a synthesis scanner, sometimes it will cause a bug that makes you become unarmed instead of equipping the scanner. Screenshothttps://imgur.com/a/Wm6CbRt 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now