Jump to content
Vulbjorn

Vulbjorn's Infested Shenanigans - Infested Harrow WiP

Recommended Posts

42 minutes ago, Vulbjorn said:

Disappeared for some time due to defense of my diploma. Diploma defended, back to modelling. Decided that previous Rhino was kinda boring, so redoing him right now. Here's WiPs. 

7a6c7979ac.jpgf836f685cb.jpg16ab43a058.jpg

The horn have a lot of straight and angular lines, doesn't go well with his organic silhouette (horns do match his crotch tho XD) unless you made a skin that complements the horn.

I miss the tusks already ;-;

Share this post


Link to post
Share on other sites

I always make skins for my helmets (excluding first one). Plus, I'm working on the horn right now.

 

P.S. I can't really see how horn is angular and straight, though. I build it in a way it would grown on an animal, which usually happens in a specific way.

P.P.S doing something wild with the horn right now. Might fix the angularity feel.

 

P.P.P.S Here's rough implementation of this idea. Not sure 8bad6f30f6.jpg

 

Edited by Vulbjorn
  • Like 1

Share this post


Link to post
Share on other sites
1 minute ago, Vulbjorn said:

Decided to go insane and with a hole. Now he has an axe for a head 8ab8a09067.jpg

 

Infested axe-unicorn Rhino, you instantly have my vote :0

Share this post


Link to post
Share on other sites
1 minute ago, lukinu_u said:

Infested axe-unicorn Rhino, you instantly have my vote :0

He's the prettiest princess around, and if you disagree, he will split you into two and gore you up until you see his gentle nature.

Share this post


Link to post
Share on other sites
1 hour ago, Vulbjorn said:

Disappeared for some time due to defense of my diploma. Diploma defended, back to modelling. Decided that previous Rhino was kinda boring, so redoing him right now. Here's WiPs. 

7a6c7979ac.jpgf836f685cb.jpg16ab43a058.jpg

That absolutely looks sick!

Share this post


Link to post
Share on other sites
23 hours ago, Vulbjorn said:

Decided to go insane and with a hole. Now he has an axe for a head 8ab8a09067.jpg

 

Now he looks so much beter,but what if you change back part of the helmet so that can look more like this....

Spoiler

because flat head look more like transformers in the movie 😁AvtR8jg.jpg

 

and yea you have my vote on this....it looks badaas

Edited by Vlada91

Share this post


Link to post
Share on other sites
2 hours ago, Vulbjorn said:

Decided to go insane and with a hole. Now he has an axe for a head 8ab8a09067.jpg

 

Nice.

Share this post


Link to post
Share on other sites

Sculpt on helmet finished. Now with less forehead bird and more actual infested horns 8501fb66ca.jpg

 

Prepare to slice and dice with some extra edge.

 

P.S. It is insane how much more detail I can do with this new PC. Still feels like someone will come say "Well, you had your share of fun" and take it away.

P.P.S. I'm also thinking of making a weapon for this guy in his style. What would be a good one?

Edited by Vulbjorn
  • Upvote 1

Share this post


Link to post
Share on other sites

Big sword or I think stalker melee reaper ...

Edited by Vlada91

Share this post


Link to post
Share on other sites
2 hours ago, Vulbjorn said:

Sculpt on helmet finished. Now with less forehead bird and more actual infested horns P.P.S. I'm also thinking of making a weapon for this guy in his style. What would be a good one?

If model for any weapon is accepted, make one for Axe or Claw weapon with similar edge like the Rhino's horn.

Share this post


Link to post
Share on other sites

Oh man, Vulbjorn! I'm loving that helmet! Two questions: 

1. Any chance of making the carapace shiny? 

2. It would be awesome to see a insect-like mouth on the helmet, something akin to a beetle mouth or even little pincers. Would that be possible? 

Thanks, Tenno! I think the helmet looks fantastic as is now though! 

(Aside: I've always wished someone would do a "Ultralisk" helmet for Rhino. We received the Tarrasque helmet for Chroma, which was awesome, but I'd love to see something for Rhino too! I'd also love to see a skin to go with the Warlust Rhino helmet too, Faven_PS!) 

 

Share this post


Link to post
Share on other sites

@LogaMC1995 An axe was my first choice, pretty obvious weapon to give Rhino. Plus, it's classified as a heavy blade, so greatswords will be able to equip it too. Claws most likely will not pass, because there are no claw source models in tennogen (I think, don't fully remember), and DE generally insists on making skins for items that are already in the workshop. Plus all claws are animated. Though, collapsed and somewhat bulky looking gauntlets that extend in combat into giant battle hooks like his horn would be excellent and very interdasting. 

@(Xbox One)ZenithLord 42 1. I'm actually planning on making his carapace very bug like. If you by chance played Path of Fire (expansion for GW2), I'm particularly impressed with shiny scarabs wandering the desert there. They have really interesting texture on their butts that I'll try and replicate to an extent. Which means - shiny, yes. Not metallic, but glittering in the sun.

2. One of the initial variations of Nyx Carnifex helmet had mandibulas on it. Had to cover them, DE takes very seriously the "no facial features" rule. So, no chance, sorry. Best I can do is an approximation of a mouth, which I gave to my Rhino. And a thunderchin, for occasional ship sinking.

I am not sure how well Warlust helmet will go with my skin (and yes, from Nyx on I'm making full body skins), but it's pretty wild looking and will probably sit on an infested body pretty well. Especially considering my kind of more "solidified" strand of infestation. 

Edited by Vulbjorn

Share this post


Link to post
Share on other sites

I don't know man, tbh it made me giggle. The horn gets fancier with every iteration :P It evolved to a point at which I don't wanna use it.  A bit goofy IMO. 

 

But hey, that's just me.

Share this post


Link to post
Share on other sites

Hey, Vsauce, Vulbjornis here. Here's some progress on body+helmet. What do you think? (keep in mind, it has no textures no tints for now. I only differentiated the outer carapace from flesh underneath). Mind that I'm at the stage where literally anything can be changed - shapes, sculpt, forms, etc. So, what should I work on? (horn stays, I like it. Plus it's very handy in survival situations)

0869fbd77f.jpg226a4781d9.jpg

Edited by Vulbjorn

Share this post


Link to post
Share on other sites
53 minutes ago, Vulbjorn said:

Hey, Vsauce, Vulbjornis here. Here's some progress on body+helmet. What do you think? (keep in mind, it has no textures no tints for now. I only differentiated the outer carapace from flesh underneath). Mind that I'm at the stage where literally anything can be changed - shapes, sculpt, forms, etc. So, what should I work on? (horn stays, I like it. Plus it's very handy in survival situations)

Maybe you should go for an assymetrical look on the upper torso part. It would fit both Rhino and the infested style.

Share this post


Link to post
Share on other sites
2 hours ago, Vulbjorn said:

Hey, Vsauce, Vulbjornis here. Here's some progress on body+helmet. What do you think? (keep in mind, it has no textures no tints for now. I only differentiated the outer carapace from flesh underneath). Mind that I'm at the stage where literally anything can be changed - shapes, sculpt, forms, etc. So, what should I work on? (horn stays, I like it. Plus it's very handy in survival situations)

 

Helmet looks sharp and roughly and that cool but body looks more like smoothly and because of that you need more rough detail....and yea desain looks cool 10+ for that...

Edited by Vlada91

Share this post


Link to post
Share on other sites
13 hours ago, Vlada91 said:

Helmet looks sharp and roughly and that cool but body looks more like smoothly and because of that you need more rough detail....and yea desain looks cool 10+ for that...

I don't disagree. Problem is - Rhino is one of the oldest frames, and his unwrap is pretty old-school, resulting in relatively low resolution texture, which is also uneven (some parts have lower resolution, some higher). I will probably take Lukinu's advice and probably go with asymmetrical look, it should fix the smootheness problem nicely. Also, really, I should try making asymmetric skin at least once.

 

Will also redo the chin. I realized that when animated it will clip into his body plates, and I don't need that. Will probably replace it with something like an exposed throat-tube, similar to dead Engineer snout it had in Alien.

Edited by Vulbjorn

Share this post


Link to post
Share on other sites

Dude first off all,I like the helmet that is not small because he have big body and I like for him to have big head...so nice job on that but for the body I think in the end you are going to creating him to look amazing. I like this style and that I even realise and because of that I hope for more male skin for you 2 create and to come in the game. For me top 5 wish frame that are good potential in you style is: of course Excal,Nekros,Ash,Loki and Wukong...

Edited by Vlada91

Share this post


Link to post
Share on other sites

Hey, had to redo the helmet a bit - chin on the first one would clip inside the body. What do you think of the new one? (it's just a sculpt, ignore the body for now)  ddfa0ed67d.jpg

Edited by Vulbjorn
  • Like 1
  • Applause 1

Share this post


Link to post
Share on other sites

For me it looks cool...:thumbup::clap:and i like that now he have a neck...

Edited by Vlada91

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...